DC to DC LED Driver with 2 to 9W Constant Current and 12/24V DC Input

bargain

add to cart

DC to DC series approvals
1 to 9 watts single output
Dimensions: 18 x 21 x 12mm
Features:
- For high brightness light-emitting diode products
- With 12/24V DC input
- Fully isolated plastic case with stripped
- Built-in constant current limiting design
- Operating from -10 to 40 full load
- Protections: OVP/OLP/SCP
- 1 year warranty
Specifications:
- Part number: FLD3510-12, FLD7012-12, FLD3508-24, FLD3520-24,and FLD7012-24
- Output operating voltage: 3 to 10V, 3 to 12V, 3 to 8V, 3 to20V, and 3 to 12V
- Rated current: 350mA ±10%, 650mA ±10%, 350mA±10%, 350mA ±10%, and 650mA ±10%
- Rated maximum power: 2, 9, 2, 5, and 9W
- Efficiency: (typical) ﹥80%
- Rise time: <30ms at full load
- Input voltage range: 10.5 to 13.5V DC, 10.5 to 13.5V DC, 22 to26V DC, 22 to 26V DC, 22 to 26V AC
- Current: 0.2A at 12V DC/0.1A at 24 DC
- Protections:
  - Overload (100 to 135% rated output power, recoversautomatically after fault condition has been removed)
  - Short circuit type: hiccup mode, recovers automatically afterfault condition is removed
  - Over voltage 105 to 120% rated output voltage
- Environment:
  - Operating temperature: -10 to 40 full load
  - Operating humidity: 20 to 95% RH non-condensing
  - Storage temperature: -20 to +80
  - Storage humidity: 10 to 95% RH
- Vibration: 10 to 500Hz, 2G 10min/1 cycle, period for 60min eachalong X, Y, Z axes
- Safety and EMC:
  - Safety standards: meet EN61347-1, EN61347-2-13
  - EMI conduction and radiation: EN61347-2-13
  - Meet: EN55015, EN61547, EN61000-4-2, 3, 4, 5, 6, 8, 11
- Others:
  - MTBF: 400K hours minimum, MIL-HDBK-217F(25)
  - Dimensions: 18 x 21 x 12mm
  - Packing/carton: 27 x 24 x 28cm, 100pcs/carton
  - Weight: 50g
  - EMS immunity
- Remark:
  - All parameters not specially mentioned are measured at 230V ACinput, rated load and 25 ambient temperature