Multifunction Cable Tracker and Tester

Multifunction Cable Tracker and Tester

45-50 USD

add to cart
  • Feature:
    • One person enough to complete cable continuity check
    • Directly hunt 5E, 6E, telephone wire, coaxial cable, USB cable and other cables
    • Check wiring error in 5E, 6E, telephone line, coaxial cable, USB cable and such as open circuit, short circuit, jumper wire, reverse connection or cross-talk interference
    • Locate the wiring or connection error
    • Measure cable length and determine the distance of open circuit and short circuit
    • Dynamically calibrate cable length and make length measurement as accurate as 97%
    • Simple and easy use
    • Big screen to display test result clear
    • Portable unit with long battery life (wait-case 50 hours)
    • Automatically time-delay shut off and backlight display function
    • Measure length and pair with or without far-end recognizer
    • Locate cable and there are 8 far-end passive test jacks (ID NoID1-ID 8)
    • Far-end recognizer with prompting voice
    • Self-checking function and automatically compensate any change in battery capacity or ambient temperature
    • Single board computer software watchdog design and reliable operation
  • Specifications:
    • Overall dimension:
      • Main tester: 185x105x50mm
      • Receiver: 218x46x29mm
      • Remote identifier: 84x34x27mm
    • Power: two laminated batteries of 9V
    • Display: special 4 x 16 character big screen LCD lattice (valid visual field 61.6 x 25.2mm)
    • Type of cable tested: STP/UTP twin twisted cable, coaxial cable, telephone line
    • Type of cable detected: 5E, 6E, telephone wire, coaxial cable, USB cable and other metal wires
    • Ambient temperature in work: -10-+60ºC
    • Tester port: tester RJ45 master port (M), tester LOOPBACK RJ45 port (L), hunting RJ45 port (With RJ45), remote identifier RJ45 port (R)
    • The extra BNC and RJ11 converters are used to measure and check the continuity of coaxial cable and telephone line
    • Length measurement of twin twisted cable:
    • Scope: 1-350M (3-200ft)
    • Calibration accuracy: 3% (+/- 0.5M or +/- 1.5 ft) (calibrating cable ﹥ 5M), Shipment accuracy: 5% (+/- 0.5 M or +/- 1.5 ft)
    • (AMP, AT&T Class 5 cable), display: M or ft
    • Length calibration: user can set calibration factor by himself with a given length cable
    • Length of calibrating cable is more than 5M
    • Wire sequence and locating cable error: check errors such as open circuit, short circuit, reverse connection, cross-over or cross-talk interference
    • Locating cable: 8 remote identifier test jacks (ID 1≥ID 8)
    • Automatic time-delay shut off time: the tester does not operate for 30 minutes
    • Packing: 30pcs/ctn, ctn size: 49*45*46cm, GW: 22.0kgs