CRI-200 Common Rail Injector Test Bench

25000 CNY (3640.07USD)

CRI-200 test bed is to detect high pressure common rail injector assembly performance of special equipment, which uses high-pressure common rail pumps produce original BOSCH 0-2000bar rail pressure, to test BOSCH, SIEMENS, DELPHI, DENSO injectors. Cylinder Observations fuel, simple operation, stable measurement.

:: Features ) ) ) )

1, the host drive with frequency control, computer control;

2, using original BOSCH high pressure common rail pumps produce 0-2000bar rail pressure;

3, the drive signal is adjustable;

4, short circuit protection;

5, real-time measurement of rail pressure, and high pressure protection;

6, the injector drive pulse width and frequency is adjustable;

7, the injector injection time or the number of injections can be freely set.

: : Features ) ) ) )

1, the measurement of the maximum common rail injector fuel (rated condition);

2, the measurement of the smallest common rail injector fuel (idle condition);

3, measuring average common rail injector fuel measurement (medium speed conditions);

4, measuring common rail injector return quantity;

5, free to set the high-pressure common rail injector fuel injection state and measurement;

6, can be atomized test: atomization, and determine whether the spray nozzle orifice blockage observed;

7, washable common rail injector: repair injector due to contamination caused by malfunction.

: : Technical Parameters ) ) ) )

1, pulse width: 0.1 ~ 20ms;

2, continuous injection frequency: 0 to 1000;

3, the fuel temperature: 40 ± 2 ℃;

4, rail pressure: 0 ~ 2000 bar;

5, the test oil filtration precision: 5μ;

6, the input power supply: three-phase 380V or three phase 220V;

7, test bench speed: 0 to 3000 rev / min;

8. Fuel tank capacity: 16L;

9, Size (MM): 1200 * 800 * 1600;

10, Weight: 400KG.