
bargain
add to cart In the differential capacitance detection principle, composition capacitive differential pressure transmitter, the input pressure is 0-50 ~ 1000Pa
, Output 4 ~ 20mA DC analog signal using the object: liquid, gas and vapor.
1151DR type | Differential Pressure Transmitter | ||||||||
| | 1 | 0-50 ~ 300Pa | |||||||
2 | 0-0.1 ~ 1kPa | ||||||||
| | Code | Features | |||||||
E | Ordinary analog (output: 4 ~ 20mA) | ||||||||
G | Conventional Smart (output: 4 ~ 20mA) | ||||||||
S | Standard intelligent type (output: 4 ~ 20mA with HART bus protocol) | ||||||||
| | Code | Structural materials | |||||||
Flange joint | Drain / vent valve | Diaphragm | Filling liquid | ||||||
22 | 316 stainless steel | 316 stainless steel | 316 stainless steel | Silicone oil | |||||
23 | 316 stainless steel | 316 stainless steel | Hastelloy C-276 | ||||||
24 | 316 stainless steel | 316 stainless steel | Monel | ||||||
25 | 316 stainless steel | 316 stainless steel | Tantalum | ||||||
| | Code | ? Static pressure MPa | |||||||
A | 1 | ||||||||
| | Code | Accuracy | |||||||
Q1 | 0.2% FS | ||||||||
Q2 | 0.2% FS | ||||||||
Code | Electrical connector | ||||||||
L1 | M20X1.5 internal thread | ||||||||
L2 | 1 / 2NPT internal thread | ||||||||
| | Code | Additional options | |||||||
M1 | 0 to 100% linear indicating meter | ||||||||
M3 | Digital display meter | ||||||||
B1 | 2 "pipe bent bracket | ||||||||
B2 | Wall / plate bent bracket | ||||||||
B3 | 2 "pipe mounted flat bracket | ||||||||
D0 | Pressure relief valve in the middle chamber | ||||||||
D1 | Pressure relief valve on the side of the upper chamber | ||||||||
D2 | Side discharge valve in the lower part of the pressure chamber | ||||||||
C0 | 1/2 "tapered pipe thread fittings | ||||||||
C1 | 1/2 "impulse joint and back welded lead pressure pipe φ14 (supplied when the content C0) | ||||||||
C2 | T-shaped nipple M20X1.5 | ||||||||
d | Flameproof EXd ⅡCT5 | ||||||||
I | Intrinsically safe EXiaⅡ CT6 | ||||||||
1151DR 2 E 22 A Q1 L1 M1B1C0 ← Selection example | |||||||||