model

Transmitter Type (choose one)

TY3051HD
TY3051HG

Differential pressure transmitters for high temperature process
Gauge pressure transmitters for high temperature process

Code

Pressure range (URL) (choose one)

2
3
4
5

0-2.5 to 0-250inH ₂ O (0-0.62 to 0-62.2kPa)
0-10 to 0-1000inH ₂ O (0-2.48 to 0-248kPa)
0-3 to 0-300psig (0-20.7 to 0-2070kPa)
0-20 to 0-2000psig (0-138 to 0-13800kPa)

Code

Export

A
M ⁽¹⁾

4-20mA, with digital signal based on HART protocol
Low power consumption, 1-5Vdc, with digital signal based on HART protocol (0.8-3.2Vdc output, with the option code C2)

Code

2
7 ⁽²⁾

Code

Process isolating diaphragms

2
3 ⁽²⁾
5

316L SST
Hastelloy C-276
Tantalum

Code

O-ring material

A

Glass filled tetrafluoroethylene (TFE)

Code

The process of filling

D
H
N

D.C. 200 silicone oil
An inert liquid
Neobee M-20

Code

Sensing film head diaphragm material

2

SST

Code

Sensing film head filled

1
2

Silicone oil
An inert liquid (a halogenated hydrocarbon)

Code

A
B
C
D
J
K
L

Code

Options

B5
B6

E5
I5
K5
C6

K6 ⁽¹⁾
I1 ⁽¹⁾
N1 ⁽¹⁾
E8
E4 ⁽¹⁾
E7
I7

L4

M5
M6

Q4
J1 ⁽²⁾
J3 ⁽²⁾
T1 ⁽³⁾
C1
C2
C4 ⁽⁴⁾
S4 ⁽⁵⁾
P1
P2
D3
D8

Mounting brackets
2-inch pipe installation and panel mounting universal mounting bracket, carbon steel bolts
2-inch pipe installation and panel mounting universal mounting bracket, SST Bolts
Hazardous Locations Certifications
Factory Mutual (FM) Explosion-Proof
Factory Mutual (FM) Intrinsically Safe and non-flammable joint certification
Factory Mutual (FM) Explosion-proof and Intrinsically Safe
Canadian Standards Association (CSA) Explosion-proof and Intrinsically Safe
(Requires maximum voltage 42.4Vdc)
CSA and CENELEC Explosion-proof and Intrinsically Safe
BASEEFA / CENELEC Intrinsic Safety Certification
BASEEFA N class certification
CESI / CENELEC Explosion-Proof
Japanese Industrial Standard (JIS) Flameproof Certification
Canadian Standards Association (SAA) flameproof certification
Canadian Standards Association (SAA) Intrinsic Safety Certification
Flange and fitting bolts
Austenitic 316 SST Bolts
Header
LCD meter for aluminum housing (only housing codes A, B, C)
LCD meter for SST housing (only housing codes J, K, L)
Other options
Check data
Only the local zero adjustment
None of the local zero and span adjustment
Transient protection terminal block
Custom software configuration (with the completion of the contract CDS00806-0100-4001)
0.8-3.2Vdc output, with digital signal based on HART protocol (output only Code M)
Analog output stage according to NAMUR recommendation NE43 1994 年 1 月 18 日
And integral orifice assembly is connected - refer PDS00813-0100-4686 Ordering Information
Hydrostatic testing
Cleaning for special applications
1 / 4-18NPT process connection (flangeless fittings)
Ceramic Ball Drain / vent valve

(1) does not apply to low-power Option Code M.
(2) The local zero and span adjustments as standard, unless specified option code J1 or J3.
(3) Not for use in hazardous location certification codes I1 or K6.
(4) Pre-set at the factory to comply with NAMUR operation, can not be changed to standard operation in the field.
(5) This option Maximum static pressure rating of 3000psi (20684kPa), applies only to non-factory assembly connected to the pipe, and is limited to the range 2345.