3 in1 hydraulic Busbar Processor Machine with Cutting Bending Punching tool

bargain

Specification

3 in 1 Hydraulic BusBar Processor/ Machine Cutting Bending Punching HB-150W

1. Applicable for: Cutting/ bending/ punching Cu Al BusBar

2. Mainly include 4 tools: Cutter (CWC-150V) Bender (CB-200A)
Puncher (CH-60) Pump (CTE-25AS)

3. Fitted with 4 way oil channel switch: Freely choose the working tool

4. Foot controller: Free two hands

5. Piston can withdraw anytime during operation

Specifications of Tools (cutter, bender, puncher, pump)

1.	CWC-150V	Hydraulic cutter	1.	Output	15T
			2.	Cutting Range	150*12mm
			3.	Cutting	Cu Al Bus bar
			4.	Weight	24kg
			5.	Size	410275180mm
			6.	V Shape Blade: fast and clean cutting
			7.	Recycle cut-down Scrap
2.	CB-200A	Hydraulic Bender (Erective Bending)	1.	Output	15T
			2.	Bending Range	150*12mm
			3.	Weight	18.5kg
			4.	Size	360260160mm
			5.	Bending	Cu Bus bar
			6.	Max bending angle	90 Degree
			7.	With different bending angle
			8.	with position unit
			9.	Open tool body, easily take out bended bus bar
3.	CH-60	Hydraulic Puncher	1.	Output	31T
			2.	Punching Range	Dia 6-20.5mm Max thickness: 13mm
			3.	Punching	Cu Al Bus bar
			4.	Throat depth	95mm
			5.	Weight	13.5kg
			6.	Size	350245110mm
			7.	Accessary1	4 Dies: Dia 10.5 13.8 17 20.5mm
			8.	Accessary2	1 fixing spanner 1 hexagon spanner
4.	CTE-25AS	Hydraulic Pump	1.	Way of oil outlet	Single Hole
			2.	Reservoir Capacity	4000cc
			3.	Weight	15.2kg
			4.	Size	310270360mm
			5.	Rating working pressure	700kgf/ cm 2
			6.	Pressure safety Valve	Automatically pressure release avoid over pressure damage
			7.	Withdraw pistion during operation