EZ-400 Battery powered Cable lug Crimper Tools for crimp 16-400mm2

945 USD

Item specifics

Model	EZ-400U Battery-Powered Crimping Tools
Crimping force:	120KN
Stroke:	20mm
Crimping per charge:	150 crimps (150 mm² Cu cable)
Crimping cycle:	4s-12s (depend on the size)
Battery voltage:	18v
Battery capacity:	3.0Ah
Charging time:	2-2.5hs
Package:	steel case
Accessories:	162535507095120150185240300400mm²
Note: 2 Battery, 1 Charger, 2 set O-ring for oil vat and safety valve

The hydraulic unit incorporates and automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.
A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston & die when the trigger is released.
The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.
The crimping head can be smoothly turned by 360 degree around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
Li-ion batteries do neither a memory effect nor self discharge. Even after long periods of non operation the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NIMH batteries.
A temperature sensor makes the tool stop working automatically when the temperature over 60 degree under long time working, the fault signal sounds, it means the tool can't continue work until the temperature reduced to the normal.