APF active power filter with three-phase unblance compensation

2+	1500-6000 USD

add to cart

HKK-APF (1) Active power filter
Technical parameters
Item: 400V ----025/035/050/060/100/150
System parameters
Rated input line voltage: 380V (-40%~20%)
Parallel connected units: Unlimited
Overall efficiency: ≥97%
Grid structure: Three-phase three-wire , three-phase four-wire
Current transformer: 150/5 ~10000/5
Circuit topology: three-level
Performance indicator
Rated capacity: 25A/35A 50A/60A 100A 150A
Harmonic compensation: Supported
Compensation: Supported
Unbalance compensation: Supported
Filtering range: 2nd~50th order
Filter times selection: Select at will from 2nd to 50th order
Filtering degree: Adjustable at will from 2nd to 50th order
Filtering performance: THDi(total harmonic distortion )<5%
Quick response time: <50us
Total response time: <5ms
Target power factor: Adjustable from -1~ 1
Control algorithm: FFT algorithm, intelligent FFT algorithm, instant reactive algorithm
Switching frequency: 20Khz
Intelligent air cooling: : 75L/Sec/151L/Sec/300L/Sec/380/760/1140/1520(L/Sec)
Noise level: <56dB
Communication monitoring capability
Communication interface: Rs485, internet access
Communication protocol: Total agreements of electricity ,Modbus protocol ,TCP/IP
Modular display interface: LCD multifunction touch color screen/LCD color screen; LED indicator lamp
PC end software: Yes, all parameters can be set through PC
Protection functions: Overvoltage protection, under-voltage protection, short-circuit protection, reverse protection of inverter bridge, overcompensation protection & more
CT monitoring and alarm: Yes
Failure alarm: Available . maximum alarm logging is 500
Monitoring : Support centralized monitoring
Mechanical characteristics
Installation method: Wall -mounted/rack-mounted (150AHKK-APF provides rack-mounted type only )
Dim.(mm3) 440x470x150/440x590x190/440x600x230 500x510x270
NW.: 18KG/35KG 36KG/48KG
Color: Black fine and texture
CT wiring method: Support power side and load side
Environment conditions
Altitude: ≤1500mbetween 1500and 4000m, power will reduce by 1% for every increase of 100m according to the national standard GB/T3859.2
Operating temperatures: -10-40°C
Relative humidity: 5-95%, no dew
Ingress protection rating: IP20, other ratings are available at request
Standard compliance: IEE519, IEC61000-3-6, ERG5/4