
| IP Camera Server with 4 Wireless Cameras Manufacturer Specifications IP Camera Server: Compression Standard: H. 264 Image Resolution: PAL: D1 (704x576) / CIF (352x288) / QCIF (176x144) NTSC: VGA (640x480) / QVGA (320x240) / QQVGA (160x120) Video Frame Rate: PAL: 25 frame/ s, NTSC: 30frame/ s Power Consumption: < 5W Ethernet: Yes, Wired RJ-45 Connectors: Video: Wireless (2.4GHz) 4 Channel Video: Wired 3 Channel Audio: Wired 3 Channel Single AV, Mono Camera: TV System: PAL/ NTSC Resolution: PAL: 628 (H) x 582 (V) , NTSC: 510 (H) x 492 (V) Image Device: 1/3 Inch Omn Vision CMOS Transmission Frequency CH 1: 2414MHz CH 2: 2432MHz CH 3: 2450MHz CH 4: 2468MHz Horizontal Definition: 380TV Line Minimum Illumination: 0Lux Nightvision: Yes - IR, Automatic-switch Transmission Signal: Audio and Video Transmission Distance: In Open Field 300-500m. Indoors: ~100M Scanning Frequency (H) : 15.625KHz 15.734KHz Scanning Frequency (V) : 50Hz 60Hz Backlight Compensation: Auto Electronic Shutter: 1/50 (1/60) -1/100000sec White Balance Auto S/ N Ratio ) 48db Gamma Correction ) 0.45 Connectors: Power Audio/ Mic connection AV out Power Adapter DC12V/ 1A Product Notes Night vision distance of the infrared camera is up to 15m View by IE browser, no special software required Remote recording and snapshot control via Internet Supports motion detection snapshots + alarm settings, which allow captured images to be sent out through e-mail Package Contents 4x Wireless Cameras 4x Antenna 4x Mounting Brackets + Hardware 5x Power Adapters (4 for wireless camera, 1 for IP camera server) 5x Free Travel Adapter (for UK, AU, NA, SA customers) AV Cable AV Converter CD with Manual and Drivers Remote Control USB Converter Ethernet Cable FAQ - Frequently Asked Questions Why can't I view the control page from my FireFox browser? For best results, please use Internet Explorer (with Active X enabled) or the provided evaluation software. Do the four wireless cameras have audio? The camera itself cannot record audio, but you can connect an external mic to each of them for audio recording. Do I have to turn night vision on manually? No, the wireless cameras each have a light sensor that detects light levels and switches to nightvision/ IR mode automatically! The photos show a AV out on the IP Camera Server, but you have not listed that functionality on your product description. Can I connect the IP Camera Server to a monitor through AV out? The IP Camera Server is sold without AV out connectivity. |