DC to DC LED Driver with 7 to 30V DC Wide Input Voltage Range and 47uF Capacitive Load

bargain

add to cart

DC to DC LED Driver, constant current regulator, 20W, 700mA
20 watts maximum single output
Dimensions: 23.40 x 14.0 x 10.16mm
Features:
- RoHS compliant 16-pin DIL package
- For high brightness light-emitting diode products
- Wide input voltage range: 7 to 30V DC input
- Output voltage range (Vin = 30V): 2 to 28V DC
- Output current range: 700mA constant current limiting design ±7%
- Ripple and noise, (20MHz bandwidth): 250mVp-p maximum
- High efficiency (up to 95%)
- Capacitive load: 47uF
- Operating frequency: 55 to 320kHz
- Safety: IEC/EN60950-1
- Operation temperature range from -40 to 85℃
- Storage temperature: -40 to +125℃
- Maximum case temperature: +100℃
- Case material: non-conductive black plastic (UL94-V0 rated)
- Protections: short-circuit protection
- PWM/digital dimming and analog voltage dimming
- Weight: 6.2g
PWM dimming and on/off control (leave Open if not used):
- Remote on/off:
  - DC/DC on: open or 0.3V
  - DC/DC off: Vadj <0.15V
  - Remote pin drive current (Vadj = 1.25V): <1mA
Quiescent input current shutdown mode (Vin = 30V): 25uA maximum
PWM dimming
Recommended maximum operating frequency: 1kHz
Minimum switch on time: 200ns
Minimum switch off time: 200ns
Analog dimming control (leave open if not used):
- Vadj input voltage range: 0.3 to 1.25V
- Adjust output current: 25 to 100%
Control voltage range limits:
- On: 0.2 to 0.3V
- Off: 0.15 to 0.25V
Analog pin drive current (Vadj = 1.25V): <1mA
EMC specifications:
- EMI radiated and conducted emissions: EN55015 (CISPR22)
- EMS immunity EN61547, IEC61000-4-2, IEC61000-4-3, IEC61000-4-4, IEC61000-4-6, and IEC61000-4-8