Low temperature impact test equipment

I. Product Overview

In line with GB2099.1-2008 section 24.4 and 30.4 requirements ( Figure 27 and Figure 42), IEC60884-1, VDE0620 other standards; single set formula applies to the plugs, sockets, switches, and other low-temperature impact test.

Second, the technical parameters

1, the low-temperature impact device should cryostat supporting the use of the device should be placed about 40mm Thick sponge rubber pad, before the test and during the test shall be placed in a suitable cryogenic tank

2, drop impact height : 10 ~ 250mm adjustable

3, low-temperature impact specimen type, drop weight and drop height quality table