Note: Only sales in the USA(not include Alaska, Hawaii, and Puerto Rico).

Features:

★High-strength pressure zinc alloy die-casting head, high-strength heat treatment spring, to ensure a lasting pressure when perfusion.

★Oil Tsui special design, increase the ball, to ensure that the work of oil does not return.

★This product was sharp angle design, in a small space within the full range of operation.

★After filling the butter, the vent valve can release the accumulated air in the tube.

★The oil filler head is used to fill the oil from the tank.

★Use the air pressure at 30 to 150PSI, each press the trigger can produce 1200 to 6000PSI pressure.

Product Specifications:

Name: Pneumatic grease gun

Capacity: 400CC

Inlet: 1 / 4''PT

Need air pressure: 30 ~ 150PSI

External pressure: 1200 ~ 600PSI

Diameter: 3/8 ''

Average air consumption: 6CFM

Note:

If the new buy pneumatic gun can not be used normally, because the gun has air accumulation. Turn the tip of a lap or a lap.

The operation is as follows:

1. Pull the pressure piston to the top, and quickly release, repeat several times, so that the accumulation of pressure to the rubber ring into the insert.

2. Leak the valve under pressure several times, let go of the air.

Packaging includes:

1 * Pneumatic grease gun

2 * accessories