USB Wall Charger with 12W Power and 90 to 264V AC Input Voltages

bargain

Universal input and wall mount slim style
12W, single output, anywhere output voltages 13 to 16V DC
Protections: OVP, OLP and short-circuit protection
Meet CEC regulation and efficiency level V
Class II power (without earth pin)/pass LPS
Specifications:
- Input voltages: 90 to 264V AC
- Input frequency range: 47 to 63Hz
- Input current: 0.4A maximum
- Inrush current: 80A maximum (cold start)
- Efficiency: ≥67% at full load
- No load stand by power: <0.3W at 230V AC
- Hold up time: 10ms minimum at nominal line
- Output voltage (any where output voltage): 13 to 16V DC
- Ripple and noise: 2% p-p maximum
- Load regulation: 5% maximum
- Dielectric withstand: I/P-O/P : 3,000V AC
- Leakage current: 0.25mA maximum
- Operating temperatures: -20 to 50°C (derating linearly from 100% load at 40°C to 75% load at 50°C)
- Storage temperatures: -40 to 85°C
- Protections: OVP, OLP and short-circuit
- Safety standards: IEC/UL/EN60950-1, CB
EMC standards: (EN55022, CISPR22 and FCC Part 15) class B, EN61000-3-2, 3, EN61000-4-2, 3, 4, 5, 6, 8, 11
Standard output connector: DC barrel jack
Standard output cable/length: UL2468/5ft
FRA012-S15-Sx:
- Output voltages: 13 to 16V
- Output current: 0.92 to 0.75A
- Maximum power: 12W
CEC level: V
CEC compliance model provide under customer s request
CEC compliance model standby power (at no load) < 0.3W
x: AC inlet Type code
x: U for US plug
x: E for EU plug