Product Description

New Design Bush Hammer For Granite Marble And limestone Floor

1. Feature

1Center water feed
2Used for stone surface dressing
3For granite ,marble ,sandstone and engineered stone

2Advantage

1 Mainly used for the stone finishing way of bush hammer finish;

2. Works with high efficiency,5-6 times faster than that of manual processing;

3. The grit of bush hammer face can be adjusted and the size of adaptor decide to its machine..

4. To create anti-slip surfaces.

5. To remove old glue and resin coatings, in particular thick resins.

6. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to 'dig' uncontrollably into the floor surface.

7. For floor preparation before laying new coatings.

8. To expose the aggregate in concrete floors to prepare for concrete polishing.

3. Size and Specification

Item Name	Specification	Remark:
Bush Hammer	D. 125x3Tx30S	1' T' means the roller quantity in per bush hammer ' S' means the segment quantity in per roller
	D. 150x4Tx30S
	D. 200x6Tx30S
	D. 250x8Tx30S
	D. 300x9Tx30S	2The size of adaptor decide to its machine, such as D42/58, D47/63, D55/71 and so on.
	D. 350x12Tx30S
	D. 400x15Tx30S
	D. 450x18Tx30S

4Packing and Shipping:

1Each bush hammer is packed in an inner cardboard case, and then several of these inner cases are put in an export standard carton; then reinforced with straps.

2. Normally we can make shipment within 7-15 days after receiving your payment.

5Payment:

1.T/T: in advance or 30% payment in advance and the rest 70% before shipping.
2.. Western Union,MoneyGram: 30% payment in advance and the rest 70% before shipping.