Simple Design LED Reading Light Transformers Study Desk Lamp

Simple Design LED Reading Light Transformers Study Desk Lamp

1000+
1.5-2.5 USD

add to cart
Instruction manual:
1. When charging, first connect power line to AC110-240V power, then charging indicator light red, means lamp is charging, fully charged needs 10 hours.
2. When using the lamp, first put lamp on the table, then reversing rotary switches, the lamp gradually light up the brightest by adjusting low to high, the rotary switch to the left, led the lights dimmed gradually until extinguished.
3. When the LED bulb is dark during usage, that means battery is at the stage of discharging. At this moment, in order to protect the battery, please stop using, and charge it in time (Please charge before the led bulb is dark fully, otherwise it would damage the battery)
4. Desk lamp should be usually used, please don' t shelve it for a long time. If you don' t usually use it, please charge it over 8 hours every 2 months, or it would affect the battery life

Caution:
1. The power and socket must be according to safety standard
2. Please don' t use when charging, it would burn LED bulbs, or damage inner components.
3. Please don' t shine the eyes directly, it would affect the eyesight. (Children must be instructed by adults)
4. Keep away from rain or wet
5. Keep far away from the exploders when charging . The charging time could not be more than 24 hours (suggestion charging in daytime).

Product parameters:
Model No. WY-161S1
Material ABS
Led 32*5631SMD
Battery capacity 900mAh
Color collocationThe yellow, green,orange,blue and rose red main part comes with the white switch and decorative pieces
Accessory1m/1.2m wire
AC / DC Charging time 12H
solar recharging 10H