General description:

This detector is a combined smoke and heat detector with photoelectronic sensor and heat thermistor together

This detector is designed to provide open area protection and to be used with most conventional fire alarm control panel

Two LEDs on each detector light to provide 360° visibility of the detector indication
They flash every 6 seconds indicating that power is applied and the detector is working properly
The LEDs latch on in alarm
The detector can be reset only by a momentary power interruption

The detector that initiated the alarm condition will have its red LED and relays latched until reset by panel
The detector combine a photo electronic sensing chamber and a temperature heat detector



Features and benefits:

• Compatible with all the security alarm system
• Alarm relay output (NO/NC can be adjustable)
• Unpolarized wire input
• Wide range of operating voltages (9-28VDC)
• Unique optical sensing chamber
• Built in microprocessor intelligent software
• Two LEDs blink standby, provide 360° visibility
• Insect-resistant screening
• Twist-on mounting base with tamper lock
• Drift compensation and smoothing algorithms

Technical specifications:
Diameter: 103mm
Height (including mounting base): 55mm
Weight: 155g
Operating temperature range: -10°C to 50°C
Operating humidity range: 10% to 93% relative humidity, non-condensing
Latching alarm: reset by momentary power interruption

Electrical ratings:
Power supply voltage: 12V DC (9V-28V DC)
Standby current: 200μA at 12V DC
Alarm current: 45mA at 12V DC
Alarm relay contacts rating: 2A at 24V DC
Smoke alarm sensitivity: 1.06±.26%FT
Temperature alarm sensitivity: 57°C (135°F) A1R