Key specifications/special features
Touch key 7' LCD video door phone intercom system with IR camera & code keypad
Features:
*MJIDS access controller
*MJIDS is a standalone access control, they use the latest microprocessor technology to operate
*Door strikes and security systems that require a momentary (timed) or latching dry contact closure
*All programming is done through the keypad
Codes and operating parameters are stored within the microprocessor and cannot be lost due to power failure
*Support 125kHz EM card
*Low power consumption (standby input current: <20mA)
*3 access modes: card, card or pin, card with pin
*Can work as a standalone keypad (pin code length: 4-6 digits)
*Relay output load can be 3A max
*Antistatic interference: 12kV
*Operating temperature: -20°C-60°C

Specifications:
*Input voltage: 12V DC
*Input current: <60mA
*User capacity: 500 user card, 1 password
*Card type: RFID compatible card
*Frequency: 125kHz
*Read range: 10-50mm
*Wiring connections: electric lock, exit button
*Remote control:
*This is a remote control device for door access control system, after you connect it on your system, you can press the remote control to open the door remotely, the distance can reach up to 6-20 meters
*125kHz RFID cards:
*These are 5pcs 125kHz RFID proximity ID card, they can work with the product which has 125kHz RFID card reader
*Water resistant
*Detecting distance: 3-10cm
*Operation frequency: 125kHz
*Each comes with key ring included
*Compatible with all RFID ID card reader to gain access
*Each token pre-programmed with unique ID which is printed on it
*Video door phone:
*Combines many functions in one: two-way intercom, surveillance, unlock, handsfree call and talk
*Indoor monitor: ultra-slim design, nice and luxurious, and with a mounting plate, it can be installed on walls easily
*7-inch TFT colored LCD display screen, without radiation, low power consumption, high definition and with sensitive touch key press control

Packing list:
1 * Outdoor unit with rain shield with access control system
3 * Power adapter (US/AU/EU/UK plug)
2 * 6 pin cable (5m)
1 * 2 pin cable
1 * 3 pin cable
3 * Mounting plate
1 * Bag of screws
1 * User' s manual
5 *125KHz RFID cards
1 * Remote control