Products elaborated
Single head system
General characteristics Indicators/operating electrical characteristics input/output licensing and certification of the mechanical properties of the surrounding environment
Sensing range: 30-500mm
Adjustment range: 50-500mm
Blind: 0-30mm
Standard target plate: 100 x 100mm
Transducer frequency approx 380kHz
Response delay approx 50ms
Steady yellow LED yellow: object detection in the range of
yellow flashing: teach-in function to detect the next target
Red LED red light: error
Red flashing: teach-in function under no object detected
Operating voltage: 10-30V DC, ripple 10% SS
Load supply current: ≤45mA
Synchronize a synchronous connection, bidirectional
0-level: -UB + 1V
1-level: +4V + UB
Input impedance: ﹥12kΩ
Synchronization pulse: ≥100μs, synchronization pulse interval: ≥2ms
Sync frequency
Normal mode max. 95Hz
Multimode ≤95Hz/n, n = number of sensors
Input type 1 teach-in input
Lower limit of detection range A1: -UB +1V, upper limit of the detection range A2: +4V-+ UB
Input Impedance: ﹥4.7kΩ, pulse width: ≥1s
Output type 1 analogue output 4-20mA
Resolution 0.13mm for max detection range
Characteristic deviation ±1% of full-scale value
Repeat accuracy ±0.1% of full-scale value
0-300 ohms load impedance
Temperature drift ±1.5% of full-scale value
UL approval cULus listed, general requirements
CSA certification cCSAus listed, general purpose
CCC certification maximum operating voltage of 36 volts products, without going through the license certification and therefore do not identify with CCC-.
Ambient temperature: -25 to 70°C (-13 to 158°F)
Storage temperature -40 to 85°C (-40 to 185°F)
Connection type connector M12 x 1, 5 pins
Protection class IP67
Material
Nickel-plated brass housing
Transducer epoxy resin/hollow glass sphere mixture; polyurethane foam, housing PBT
Weight: 60g