Features:
IP65 outdoor cabinets with A/C
_ The cabinet adopt the double wall type design. It is composed with main body, roof, the rear panel, the side panel and the base.
_ The double wall type rear panel, the dual side panel, the bolts are fixed by inside. The double wall type gate has the bikini fixing device, after closes the gate not to be able to see the bolt from outside. Leans the kneading board to cover the cabinet and the Foundation, eliminated entered the cabinet by the compulsory measure weakness.
_ Inside and outside side kneadingboard (spacing 25mm) the band provides ventilates the channel, supports the cabinet internal heat change and may reduce the sunlight illumination the infIuence.
_ The roof panel has the rain awning with the size all around stretches out 25mm and 75mm high. Which have the integrity well ventilated to clamp the trough and ensuring the exchanging of the gas.
_ The base may use the entire block or divide three parts of sealed panel to seal.
_ The cabinet can adopt 19 inch structure to install, It can install the mounting panel or according to the custom design also.
_ The natural wind cooling. The cabinet can be installed fans on the top cover and punched the hole with dust proof cover at the bottom of two sides.
_ Protection Degress: : IP55
_ We can design the structure as the customer requirement.
Standard and Material:
Comply with GB/T 19183 and IEC 61969.
Surface Treatment: Degreasing, phosphating, powder coating.
Material: Cold rolled steel or stainless steel
Color: RAL5012(Top cover and base); RAL7035(The others)