8 Port RJ45 Surge Protector

8 Port RJ45 Surge Protector

bargain

add to cart
Model NO. WPX-BHSA-8R2-5
Structure Zinc Oxide Arrester
Application Network, Telecommunication
Operation Voltage Low Voltage
Material Metal
Brand Wpx
Transport Package 1 Units Per Box
HS Code 8536300000
Type Signal Type Arrester
Installation Wall Mount
Size Small
Shape Square
Certification ROHS, ISO9001, SGS, CCC, TUV
Trademark WPX
Origin China
8 port RJ45 surge protector

Product introduction:
Network Surge Protector Series is used for protection of the interface circuit of high speed Ethernet. It is connected in the input end of protected equipment. When the transmission line is struck bylightning, the lightning current is discharged to the earth through the lightning branches, and the lightning overvoltage is clamped within a properrange, thus the security of equipment being ensured.
Product Show
Specification
Model Number WPX-BHSA-8R2-5
Art No. 691 201
SPD category Type2
Rated Working Voltage Uo 5V
DC Max Continuous Operating Voltage Uc 6V
AC Max Continuous Operating Voltage Uc 4.8V
Max working current(IL) 0.5A
C2 Total nominal discharge current (8/20μs)(Itotal)tal)tal) 5kA
C2 nominal discharge current (8/20μs)per wire(In)(In)(In) 2.5kA
Total nominal discharge current C2-PE(Itotal) 10kA
Nominal discharge current per wire C2-PE(In) 2.5kA
Voltage protection level wire-wire C2(UP) ≤50V;50V;50V
Voltage protection level wire-PE C2(UP) ≤70V;70V;70V
Voltage protection level wire-wire 1kV/usC3(UP) ≤25V;25V;25V
Voltage protection level wire-PE 1kV/usC3(UP) ≤25V;25V;25V
Response Time tA ≤ 1ns 1ns 1ns
Transmission rate 100Mbps
Insertion Loss(250MHz) ≤1.0dB.0dB.0dB
Impedance in series ≤0.5Ω0.5ΩOmega;0.5Ω
Protected pin 1/2;3/6;
Relative Humidity ≤95%(25ºC)5ºC)dm;C)5ºC)
Operating Temperature Range(TU) -40ºC~+80ºC~+80ºCrdm;C~+80ºC
Atmospheric Pressure 86~106 kPa
Wiring methods RJ45
Port numbers in-8×RJ45;out-8×RJ45-8×RJ45s;RJ45-8×RJ45
Housing material Aluminum
Installation place Indoor
Degree of protection(IP code) IP20
Installation methods Wall mounting
Company Show
Products Application/ Certificates

FAQ:
What is the Surge Protection?
The Surge Protection is a system of surge protectors working together to eliminate surges from a number of external and internal sources. Applying surge protectors at the incoming electrical, cable/satellite, control system, and telephone utility services keep externally generated surges from entering your office or factory or home. Localized surge protectors applied to sensitive electronics safeguard against internally generated surges.

Do I need surge protection?
Yes. The reality is that surges are occuring daily and effecting the equipment in your home, office or factory. Typically surge protection is attributed to 'lightning protection' but the fact of the matter is that surges are caused most often from utility disturbances and internally generated surges. It is common for factory or home owners to lose equipment due to surge damage and not even realize it. Many 'mysterious' equipment, and computer problems such as devices failure are actually due to electrical surges. Also, breakdowns and replacements of electronic equipment due to what you think of as 'normal' wear and tear may actually be due to internally or externally caused surges.ly or externally caused surges.
How often do these disturbances occur?
Because we use so many things like PLC, Switch, router, pumps, CCTV systems all the time, disturbances happen frequently.
What is a Surge Protector?
Surge Protectors are designed to reduce and divert potentially damaging short-duration voltage spikes safely out of the system to Ground. This is similar in concept to pressure relief valves that protect water heaters from overpressure. It is a common misconception that surge protectors 'absorb' surges when in fact their purpose is to divert the surge away from the protected equipment to Ground. to Ground.
My electronics have built-in surge protection. Why do I need more?
Built-in surge protectors often aren't strong enough to handle larger surges and spikes and, like other smaller surge protectors, can wear out without your even knowing it, leaving you with no protection at all. Built-in protection for one piece of equipment may still leave you without protection for important equipment such as PLC, Computer, CCTV system, SCADA, telephone, answering machines, modems, printers, etc.
How long will my surge protector last?
Under normal operation, these devices will operate indefinitely. The devices have been engineered by WPX, an 'ISO9001:2008' certified industry leading manufacturer and are built to withstand multiple surge events. Our world class test facility assures maximum design efficiencies and assures maximum accuracy, quality, and dependability. WPX demonstrates its faith in these products with a 1-year product warranty for the SPD.or the SPD.
How do I reset my Surge Protector?
Surge protectors cannot be 'reset.' But it will auto-reset after one surge discharge event.arge event.
For more information and Service, please contact:

Contact: Ms. Soniya
Mob: +86 13317313420
Web: www.spdwpx.com
Related Hot selling products:
http://www.spdwpx.com/a/Products/