RJ45 Gigabit Microwave RF Antenna Poe Surge Arrester

1-15 USD

Model NO.	WPX-PTSA-2R4-48
Structure	Zinc Oxide Arrester
Application	Network, Telecommunication
Operation Voltage	Low Voltage
Material	Metal
Brand	Wpx
Transport Package	1 Units Per Box
HS Code	8536300000
Type	Signal Type Arrester
Installation	Wall Mount
Size	Small
Shape	Square
Certification	ROHS, ISO9001, SGS, CCC, TUV
Trademark	WPX
Origin	China

1000Mbps RJ45 Gigabit Poe Outdoor Surge Protector

Product introduction:
Support data rates of up to 1000Mbps; enclosure rating of IP67 for all outdoor conditions; high data voltage protection; Pole and Wall mounting kits.

Product Show

Specification

Model Number	WPX-PTSA-2R4-48
Art No.	692 406
SPD category	Type2
Rated Working Voltage( Uo)	48V
DC Max Continuous Operating Voltage( Uc)	58V
AC Max Continuous Operating Voltage( Uc)	35V
Max working current (IL)	1A
POE power supply	1,2-3,6 or 4,5-7,8 ;Total 95W
C2 Total nominal discharge current (8/20μs)(Itotal)tal)tal)	1.2kA
C2 nominal discharge current (8/20μs)per wire(In)(In)(In)	0.3kA
Total nominal discharge current C2-PE(Itotal)	20kA
Nominal discharge current per wire C2-PE(In)	2.5kA
Voltage protection level wire-wire C2(Up)	≤120V120V120V
Voltage protection level wire-PE C2(Up)	≤1000V000V000V
Voltage protection level wire-wire 1kV/usC3(Up)	≤90V;90V;90V
Voltage protection level wire-PE 1kV/usC3(Up)	≤600V600V600V
Response Time(tA)	≤1ns;1ns;1ns
Transmission rate	1000Mbps
Insertion Loss(100MHz)	≤1.0dB.0dB.0dB
Impedance in series	≤0.5Ω0.5ΩOmega;0.5Ω
Protected pin	1/2;3/6;4/5;7/8
Relative Humidity	≤95%(25ºC)5ºC)dm;C)5ºC)
Working temperature range(TU)	-40ºC---+80ºC-+80ºCrdm;C-+80ºC
Atmospheric Pressure	86kPa...106kPa
Wiring methods	RJ45(shield)
Port numbers	in-1×RJ45;out-1×RJ45-1×RJ45s;RJ45-1×RJ45
Housing material	PC/ABS UL94 V-0
Installation place	Indoor or Outdoor
Degree of protection(IP code)	IP54

Company Show

Products Application/ Certificates

FAQ:
What is the Surge Protection?
The Surge Protection is a system of surge protectors working together to eliminate surges from a number of external and internal sources. Applying surge protectors at the incoming electrical, cable/satellite, control system, and telephone utility services keep externally generated surges from entering your office or factory or home. Localized surge protectors applied to sensitive electronics safeguard against internally generated surges.

Do I need surge protection?
Yes. The reality is that surges are occuring daily and effecting the equipment in your home, office or factory. Typically surge protection is attributed to 'lightning protection' but the fact of the matter is that surges are caused most often from utility disturbances and internally generated surges. It is common for factory or home owners to lose equipment due to surge damage and not even realize it. Many 'mysterious' equipment, and computer problems such as devices failure are actually due to electrical surges. Also, breakdowns and replacements of electronic equipment due to what you think of as 'normal' wear and tear may actually be due to internally or externally caused surges.ly or externally caused surges.
How often do these disturbances occur?
Because we use so many things like PLC, Switch, router, pumps, CCTV systems all the time, disturbances happen frequently.
What is a Surge Protector?
Surge Protectors are designed to reduce and divert potentially damaging short-duration voltage spikes safely out of the system to Ground. This is similar in concept to pressure relief valves that protect water heaters from overpressure. It is a common misconception that surge protectors 'absorb' surges when in fact their purpose is to divert the surge away from the protected equipment to Ground. to Ground.
My electronics have built-in surge protection. Why do I need more?
Built-in surge protectors often aren't strong enough to handle larger surges and spikes and, like other smaller surge protectors, can wear out without your even knowing it, leaving you with no protection at all. Built-in protection for one piece of equipment may still leave you without protection for important equipment such as PLC, Computer, CCTV system, SCADA, telephone, answering machines, modems, printers, etc.
How long will my surge protector last?
Under normal operation, these devices will operate indefinitely. The devices have been engineered by WPX, an 'ISO9001:2008' certified industry leading manufacturer and are built to withstand multiple surge events. Our world class test facility assures maximum design efficiencies and assures maximum accuracy, quality, and dependability. WPX demonstrates its faith in these products with a 1-year product warranty for the SPD.or the SPD.
How do I reset my Surge Protector?
Surge protectors cannot be 'reset.' But it will auto-reset after one surge discharge event.arge event.
For more information and Service, please contact:

Contact: Ms. Soniya
Mob86 13317313420
Web: www.spdwpx.com
Related Hot selling products:
http://www.spdwpx.com/a/Products/