48V Poe Surge Protector

bargain

Model NO.	WPX-PTSA-R4-48
Structure	Zinc Oxide Arrester
Application	IP Camera, Tower Station, Telecommunication
Operation Voltage	Low Voltage
Material	Stainless Steel
Brand	Wpx
Transport Package	2 Units Per Box, 48 PCS Per Carton
HS Code	8536300000
Type	Signal Type Arrester
Installation	Wall Mount or Wiring
Size	Small
Shape	Cylinder
Certification	ROHS, ISO9001, SGS, CCC, TUV
Trademark	WPX
Origin	China

48V POE surge protector

Product introduction:
WPX-PTSA-R4-48 signal surge protective device is mainly for protecting high-speed Ethernet Internal interface circuit with POE. Connection in series the input of protected equipment,when the transmission line suffered lightning induction,surge protective device will discharge lightning current to the earth, clamp the lightning overvoltage so that keep the voltage within an allowable range and ensure the safety of the equipment. Waterproof rating of IP67.

Product Show

Specification

Model Number	WPX-PTSA-R4-48
Art No.	692 401
SPD category	Type2
Rated Working Voltage Uo	48V
DC Max Continuous Operating Voltage Uc	58V
AC Max Continuous Operating Voltage Uc	35V
Max working current(I_L)	0.8A
C2 Total nominal discharge current (8/20μs)(Itotal)tal)tal)	10kA
C2 nominal discharge current (8/20μs)per wire(In)(In)(In)	2.5kA
Total nominal discharge current C2-PE(Itotal)	20kA
Nominal discharge current per wire C2-PE(In)	2.5kA
Voltage protection level wire-wire C2(UP)	≤120V120V120V
Voltage protection level wire-PE C2(UP)	≤150V150V150V
Voltage protection level wire-wire 1kV/usC3(UP)	≤90V;90V;90V
Voltage protection level wire-PE 1kV/usC3(UP)	≤90V;90V;90V
Response Time tA	≤ 1ns 1ns 1ns
Transmission rate	1000Mbps
Insertion Loss(250MHz)	≤1.0dB.0dB.0dB
Impedance in series	≤0.5Ω0.5ΩOmega;0.5Ω
Protected pin	1/2;3/6;4/5;7/8
Relative Humidity	≤95%(25ºC)5ºC)dm;C)5ºC)
Operating Temperature Range(TU)	-40ºC~+80ºC~+80ºCrdm;C~+80ºC
Atmospheric Pressure	86~106 kPa
Wiring methods	RJ45
Port numbers	in-1×RJ45;out-1×RJ45-1×RJ45s;RJ45-1×RJ45
Housing material	Stainless steel
Installation place	Indoor/Outdoor
Degree of protection(IP code)	IP67(high)
Installation methods	Wall mounting

Company Show

Products Application/ Certificates

FAQ:
What is the Surge Protection?
The Surge Protection is a system of surge protectors working together to eliminate surges from a number of external and internal sources. Applying surge protectors at the incoming electrical, cable/satellite, control system, and telephone utility services keep externally generated surges from entering your office or factory or home. Localized surge protectors applied to sensitive electronics safeguard against internally generated surges.

Do I need surge protection?
Yes. The reality is that surges are occuring daily and effecting the equipment in your home, office or factory. Typically surge protection is attributed to 'lightning protection' but the fact of the matter is that surges are caused most often from utility disturbances and internally generated surges. It is common for factory or home owners to lose equipment due to surge damage and not even realize it. Many 'mysterious' equipment, and computer problems such as devices failure are actually due to electrical surges. Also, breakdowns and replacements of electronic equipment due to what you think of as 'normal' wear and tear may actually be due to internally or externally caused surges.ly or externally caused surges.
How often do these disturbances occur?
Because we use so many things like PLC, Switch, router, pumps, CCTV systems all the time, disturbances happen frequently.
What is a Surge Protector?
Surge Protectors are designed to reduce and divert potentially damaging short-duration voltage spikes safely out of the system to Ground. This is similar in concept to pressure relief valves that protect water heaters from overpressure. It is a common misconception that surge protectors 'absorb' surges when in fact their purpose is to divert the surge away from the protected equipment to Ground. to Ground.
My electronics have built-in surge protection. Why do I need more?
Built-in surge protectors often aren't strong enough to handle larger surges and spikes and, like other smaller surge protectors, can wear out without your even knowing it, leaving you with no protection at all. Built-in protection for one piece of equipment may still leave you without protection for important equipment such as PLC, Computer, CCTV system, SCADA, telephone, answering machines, modems, printers, etc.
How long will my surge protector last?
Under normal operation, these devices will operate indefinitely. The devices have been engineered by WPX, an 'ISO9001:2008' certified industry leading manufacturer and are built to withstand multiple surge events. Our world class test facility assures maximum design efficiencies and assures maximum accuracy, quality, and dependability. WPX demonstrates its faith in these products with a 1-year product warranty for the SPD.or the SPD.
How do I reset my Surge Protector?
Surge protectors cannot be 'reset.' But it will auto-reset after one surge discharge event.arge event.
For more information and Service, please contact:

Contact: Ms. Soniya
Mob +86 13317313420
Web: www.spdwpx.com
Related Hot selling products:
http://www.spdwpx.com/a/Products/