AV serial matrix switch WB-MAX1616 has 16inputand 16output, is an intellectual switch equipment of high performance which isdesigned for video and audio signal displaying and switching. It isused to switch one of the multiple input video and audio signal to any outputport.
It is mainly used in Broadcasting Project, MultimediaConference Hall, Large Screen Displaying Project, Television Teaching, andControl Center etc.
Specific Function:
--Each channel video has the function of overlapping the Chinese/English character
--Adopt 4U plug-in high density module structure, facilitates the combination and expansion
--3D keyboard which has matrix/DVR/PTZ controlling function16 keyboard can be attachment, support many kinds of organizing network
-The system may carry on networking by many and multistage matrix through RS485
-Hot standby design, to ensure the host unit's stability
Basic Function:
-Support system partitioning function and keyboard's permissions to the monitor and camera can be defined by user
-Video input and output port as well as communication interface have surge protection and lightning protection function
-Menu displayed both in Chinese and English, preset each function of matrix
-Alarm input linkage, turn on the camera and the light automatically, switch preset image automatically and start the recording
-Can preset guarding method of any monitored space: Timing, manual, enable/disable alarm and check the alarm log
-Up to 128 camera inputs and 32 monitor outputs
Model: WB-MAX1616
Bandwidth:
150MHz (-3dB) fully loaded
0-10MHz (+0.1dB to -0.1dB)
0-30MHz (+0.5dB to -0.5dB)
Brightness color interfere: -50dB at 5MHz, -45dB at 10MHz
Switch speed: 200ns (the longest time)
Differential phase error: 0.1%, 3.8-4.43MHz
Differential gain error: 0.1%, 3.8-4.43MHz
Largest transmit time delay (+1ns): 5ns
Video input signal type: AV signal
Connection type: RCA
Minimum input level positive: 0.5Vp-p
Maximum input level positive: 2.0Vp-p
I/O impedance: 75Ω
Echo wasting: -30dB at 5MHz
Largest DC compensate: 1.5V
Synchronous phase-lock: 0.3V-0.4Vp-p
Largest DC compensate: +5Mv-0
Control type: RS-232control protocol, infrared control, manual front panel control, accidental power off protection
Control port: RS-232, 9-pin COM connection port
Baud: 9600/4800/2400
Digit bit: 8
Stop bit: 1
Proofread bit: Not supported
Control configuration: 2=TX, 3=RX, 5=GND
Control program: Webitelecomms matrix control program for Windows
Specification power supply: 220V/50Hz
Power: 20W
Installation: With standard installation rack
MTTF: 30, 000 hours
Audio plus imbalance: 0dB
Recording radiation response: 20Hz-20kHz +0.05dB
Noise dealing: 0.03% at 1kHz
S/N: ﹥90, output 21dBu balance ration output powerower
Light/color interfere: <-80 at 1kHz, fully loadedaded
Stereo channel separate: <75 at 20Hz-20kHz0kHz