Product parameters:
'Performance characteristics'
◎ Good viscosity-temperature performance, effective transmission of kinetic energy to ensure that in any case can reduce the power transmission loss
◎ has good rubber material applicability, effectively prevent the seal failure
◎ good abrasion resistance and the appropriate friction characteristics, the vehicle has a good shift feel
'Technical Specifications'
Products meet the following specifications:
Q / SH303 064-2007
'Use range'
◎ Hydraulic torque converter and hydraulic coupling for industrial machinery, agricultural machinery and other equipment
◎ applicable to all types of light passenger cars and trucks automatic transmission
'Typical data'
project | Hydraulic transmission oil |
SAE viscosity grade | 6 8 |
Kinematic viscosity (100 ℃) / mm2 / s | 5.940 7.712 |
Flash point (open), ℃ | 228 217 |
Freezing point, ℃ | -34 -35 |
Brookfield viscosity (-18 ° C) / mPa · s | 1898 1772 |
'Precautions'
◎ Do not mix with other lubricants, different lubricating oil may occur between the physical or chemical reaction leading to reduced performance
◎ timely cover after use to avoid moisture, dust and other impurities mixed
◎ Use in the rubber, plastic, paint and other non-metallic materials in contact with the lubricating parts, the material should be conducted before compatibility test
◎ If you want to change the oil, you should wait until the oil in the tank is exhausted and then add another oil