(We provide 2/4/6/8 probe for you to choose, please select the package for your purchase, there are unknown areas, contact us)

4 probe products really making plans

6 probe products really making plans

8 probe products really making plans

Category:led Digital three mode switch (mute / buzz / live voice)
Model: NY-2200
Products Card: two wolf god
Manufacturing: Shenzhen Connaught Technology Co., Ltd

Introduction:
The system is equipped with imported ultrasonic sensors to detect whether there is an obstacle after the car is accurately measured.The principle is to use the microcomputer system operation command and control, Through the sound and display were prompted to the direction of the obstacles and the distance between the body and obstacles in order to achieve the collision prevention in unburned.

The collision avoidance system features:
◆ after the installation of four exploration, reversing, automatic detection of obstacles after starting the car
◆ front of the installation of two probes or four, when driving forward, the brakes, start (Note: This feature is required for 6 or 8 probe products)
◆ When the brakes, the front of the probe automatically work, loose brakes, the probe automatically delay the work of about 20 seconds after the stopNote: This feature is required for 6 or 8 probe products)
◆ crescent type led Heartbeat-level display, digital, sound step-by-step tips.
◆ microcomputer intelligent control, accurate digital display obstacle distance, from military technology, accurate and reliable.
◆ not affected by the environment, rain, especially in the night advantage.
◆ anti-electromagnetic interference, patented technology, international certification. Quality assurance. Original electronic system without any effect.
◆ probe with embedded installation, multi-color configuration sensor compact, easy to install.
◆Using the latest technology and programs, prompted speakers built-in display, so that product installation more convenient and more concise.

Car reversing radar technical parameters:
◆ detection distance: after the car: 0.3-2.0m
◆ Detection distance: front: 0.3--0.8m (Note: This feature is required for 6 or 8 probe products)
◆ Operating voltage: dc12v (+ - 2v)
◆ operating current: 20ma-200ma maximum power: 2w
◆ ultrasonic frequency: 40khz detection angle: h> 80 degrees v> 70 degrees
◆ Operating temperature: -20c ~ +80 c Warning volume:> 70DB

Alarm prompt mode:
◆ voice prompts: the system uses three kinds of sound, mute, buzz, live voice three modes of switching .. Obstacle the closer the more rapid
◆ light tips: the use of three colors of light, heart-shaped tips obstacle distance
◆ Digital Tip: in the middle of the display, a clear number of tips distance obstacles, accurate and accurate, at a glance

Accuracy
Is subject to many factors, the car after the obstacles are different, the data will be different, such as the car after the obstacles are: the activities of the human body, high-speed sports car, small cylinder, etc., they get the data will be different, Because different objects, reflected back more or less ultrasonic, so the host calculated data are also different: 'two wolf god' reversing radar if facing a wall, slow test, you can get high accuracy.

Sensitivity
This is a lot of people will have a misunderstanding, the radar is not the higher the better sensitivity, of course, is not to say that low is good, is to take a moderate degree, the sensitivity of the manufacturers through the test and adjust the good, and some manufacturers regardless of product, Only to see the hobby of the hobby, the sensitivity to the highest, this will make the radar there are many false positives, such as: rain due to rain on the probe surface, resulting in false positives, or because the wind, Produce false positives and so on.

About the installation
You can choose to install, install very simple, if you need more information on the installation, you can ask us, you can also find a car beauty shop, car repair shop to install, four-probe radar Installation is generally 60 to 80 yuan, 6 probe radar installation is generally 80 to 100 yuan, this price is only for Amoy fris reference, different places, different people to install, the price is not the same

Note on installation:
1) the height of the probe installation, the request from the ground 50CM or so, if the installation is too low, will detect the ground, the probe will have a UP, a small arrow Peugeot, small arrows up, but there are special models, In particular, the individual need to adjust it
2) experienced installation technicians, in the hole installation, the probe card will glue or hole trim, so that the probe pressure too tight, and let it not work, (the probe is the vibration of the ultrasonic), of course, Nor too loose, so that the vibration of the car and change the direction of the probe to the ground to generate false positives.

After the auction, please tell us the color of the probe you need (the probe is mounted on the car bumper) or tell us your model and color