"Ordering instructions"
1, the company product small batch orders, support mixed batch quantities of 10 sets. 10 the following price: 88.
2, box with the default color box package, if you have other requirements, please order the notes clear or contact customer service.
3, cat welcome line wholesaler/Taobao shops/aliexpress wholesale/eBay/customers, a large quantity of Cong, integrity management, quality assurance, best price.

1, introduction

Name: TK102b vehicle Locator

Brand: Oki

Model: TK102b

This product is based on the GSM/GPS network and GPS satellite positioning system, by text message or contact each other to locate the remote target or monitoring.

2, applications

Car rental/small fleet management

Powerful magnet + waterproof bags can be adsorbed on the hidden track on the car.

Children/elderly/disabled/pet care.

Personal safety

Personnel management

Tracking crime

3, technical parameters

Content	Specifications
Dimensions	64mm x 46mm x 17mm(1.8' *2.5' *0.65' )
Weight	50g
Internet	GSM/GPRS
Network bands	850/900/1800/1900Mhz
Chip	UBLOX chip
GPS sensitivity	-159dBm
GPS accuracy	5m
The startup time for the first time	Cold status 45s Warm status 35s Hot status 1s
Car charging voltage	12—24V input 5V output
Direct charge voltage Charging voltage	110- 220V input 5V output
Battery	Rechargeable 3.7V 850mAh lithium-ion battery
Long standby	48 hours
Storage temperature	-40°C to +85°C
Working temperature	-20°C to +55°C
Humidity	5%--95% non-condensing

4, product accessories

1 x host

1 x magnet cover

1 x waterproof bag

1 x direct charge

2 x batteries

1 x manual

1 x mini color box packaging

1 x charger

5, instructions for use

5.1 place the SIM card

Please be sure to confirm the SIM card don't call forwarding and open the caller ID and PIN code is turned off. Text message must be plain text

And PDU format is not recognized.

5.1.1 open the back cover, and remove the battery.

5.1.2 push back on sheet metal and pull it up.

5.1.3 the SIM card into the slot, and metal sheets pushed forward when you press down to its original position.

5.2 battery and charger

When charging for the first time, please charge the battery for 8-12 hours. Please use unified configuration by the manufacturer of the charger and batteries, standard battery for lithium-ion batteries and fully charged to normal standby after about 48 hours, under normal use the battery charging time is 6 hours.

Warn

A: battery lithium-ion batteries contain harmful chemical ingredients of this product and may explode, do not slapped, stabbed it and put on fire.

B: Please recharge the equipment normal work.

5.3 device startup

• Put the SIM card and battery good

L take it outside and press the device off 4-5 seconds, led flashes.

• When using for the first time, initialized to the default settings. After 10-40 seconds, the device will search for GSM and GPS signals and

Start normal work, in the normal state of the device led will keep flashing once every 3 seconds.

• When the device is in the receive the GPS signal correctly, you can use it anywhere in the manual instruction set.

Note * device works, upload positioning data motion under 20S, static state GPS is turned off, the device by shaking

Sensor identification movement (vibration) or static (not shaking), by positioning the device to not locate State, number of GPS positioning device will retain the last

According to, when setting up fences and mobile alarm, devices must be in position.

5.4 initialization settings

Send SMS '#begin#' to the device, it will reply to 'begin ok' and back to the default factory settings. (The factory default password is:

123456) Note: data is initialized, so the device restore factory value, such as back to the original password. the authorization number.

Example: send a SMS '#begin#' will reply 'begin ok'.

5.5 setting the password

5.5.1 setting: send SMS commands '#password# #' # old password new password to the device will change the password.

For example: sending '#password#123456#888888#' to the Terminal, Terminal recovery password OK, the password successfully changed.

5.5.2 new passwords must be 6 digits, or the device will not recognize.

5.6 authorization settings

Please be sure to set the authorization number prior to use.

5.6.1 set authorization: send SMS password '#Admin# # need to authorize phone number #'. If authorization is set successfully, the device will

Reply message 'admin ok'. May authorize two authorization number.

5.6.2 deleting authorization: send SMS '#noadmin# # password authorization number #' you want to delete.

5.7 time positioning

5.7.1 if you did not set your authorization number, any number dialed device it will respond to the latitude and longitude information; If you have set up your authorization number,

Non-authorization number dialing devices it will not respond to the latitude and longitude information.

5.7.2 dial position: with a mobile device, the device will hang up your phone and respond to a longitude and latitude of real-time information.

5.7.3 SMS position: send SMS '#smslink#123456#', the device will revert to a longitude and latitude of real-time information.

5.8 text location query

5.8.1 use this feature to set up the local GSM network APN, if you require a login username and password set in the local (APN and

User name and password method employed see the APN settings)

5.8.2 where to send the '#address#123456#' will respond to local information, such as: ' East Road, Baoan district, Shenzhen City, Guangdong Province,

New supermarket about 20 metres. '

5.9 Automatic continuous positioning

5.9.1 send SMS '#at#30#sum#15#' to the device, it sends every 30 seconds once the latitude and longitude information altogether sent 15 times. (Defaults to

Recognition is set to s: seconds)

5.9.2 an unlimited number of location: send SMS '#at#30#sum#0#' to the device.

5.9.3 time: send '#noat# password #' to the device.

5.10 monitor

5.10. the conversion commands between the 12 modes as 'track' and ' monitor'

5.110.2 'tracker' is the default status (localization).

5.10.3 send SMS commands '#monitor# # password ' to the device, the device will respond to your 'monitor OK!', have been converted to

In the listening mode.

5.10.4 send SMS commands #' '#Tracker# password to the device, the device will respond to 'tracker OK!' and return to the position mode.

5.11 mobile alarm

5.11.1 set: when the device is stable within 5 minutes stay in one place, you can send SMS command '#move#123456#' to the device,

Device will reply SMS: 'move ok' open vibration alarm.

5.11.2 to cancel settings: you can send SMS command '#nomove#123456#' to the device to cancel the move alerts.

5.12 electronic fence

Set up electronic fences can be limited the range of equipment, once the equipment is out of range the appliance will automatically send the information back to the authorized number

Code.

5.12.1 setting: when the device is stable within 5 minutes stay in one place, you will be able to send SMS commands '#Stockade# password # RADIUS #'

To the device you can set a limited, once a device beyond the limited device alert information will be sent to your authorization number.

For example, to send text messages: '#Stockade#123456#3#', '3' on behalf of 300 meters.

5.12.2 setting up: send SMS commands '#nostockade# password #' can unlock this feature set.

5.13 overspeed alarm

5.13.1 set: send SMS commands '#speed# password # three-speed ' to the device (assuming speed is 80km/h), for example: '#speed#123456#080#' and then the device will reply 'speed OK!'. when the device runs faster than 80km/h, this

Alerts will be sent information on the authorization number.

5.13.2 unset: send SMS '#nospeed# password #' can unlock this feature set.

5.14 vibration alarm

5.14.1 set: send SMS commands '#vibrate# #' password # vibration levels to the device, for example: '#vibrate#123456#3#'

Then the device will reply 'vibrate OK!'. when the device is sensitive to motion, the device alert information will be sent to the authorized number. (Shake 1.2.3 level 1 recognition felt weak, 3 identify felt strong)

5.14.2 unset: send SMS '#novibrate# password #' can unlock this feature set.

5.15 emergency alarm

Immediately press the SOS button for 3 seconds, the device will send an SMS 'SOS alarm+ information +IMEI number ' to all your authorization number.

5.16 alarm mode

Settings: send SMS commands '#KC# password # #' to the device, for example: '#KC#123456#1#' and then the device will reply to 'KC

ok!' (There are 0.1 ... 2, 0 turn off alarm 1 SMS alarm 2 alarm)

5.17 terminal equipment value for time setting time + 8 time zone.

Sending the SMS instruction: '#timezone# password # location # # half time zones ', if this is successful, returns time zone OK

Example: six West region, GMT-6, should be set up: sending '#timezone#123456#W#6#00#' w represents the time zone of six West, 6

Setting the time code, 00 represents the difference in minutes.

5.18 GPRS settings

Before using GPRS, user have to send SMS for Tracker settings APN, IP and port number.

5.18.1 set APN

5.18.1.1 different APN, GSM operators in different countries are not the same, I want to know the APN you use SIM card contact your local GPRS

Network consulting

5.18.1.2 the use of mobile phones to send SMS commands '#APN# #APN username #APN password #' password #APN content to the device, if you set

Successful, the device will reply message 'apn ok'.

5.18.1.3 for example: send SMS command '#APN#123456#CMNet#' to the device, if this is successful, the device will respond to short

'Apn ok',

Note: 123456 is the password, CMNET is a network operator's APN. no APN username and password do not need to fill out.

5.18.2 set IP and port

#IP address 5.18.2.1 send SMS commands '#IP# password #' # port, if this is successful, the device will reply message 'set IP

address and port ok' .

For example: send SMS commands '#IP#123456#58.64.200.27#6821#' is successful (123456 is the password, 58.64.

200.27 is IP, 6780 port).

5.19 device status query

Send SMS '#TCP#', query device state, for example: send SMS command '#TCP#', the device will reply message ' IP+ port +APN

+GPS (a: effective, v: invalid) + authorization number +IMEI number + alarm mode