Shop all memory cards are original enough cards, not fiction, not false memory, please rest assured purchase Oh!!

Operation

1) on/off

① boot

Long press the operations button for two seconds to open the device, long red light, enters the standby state.

② shutdown

Long press the operation button for four seconds, the red light goes out shut.

2) photo

① standby mode (if it is not in standby mode, short boot or enter standby press the action key).

II camera need to shoot a goal.

③ Press operation button, red light flashes once, take a picture

3) video

① standby mode (if it is not in standby mode, short boot or enter standby press the action key).

II press and hold action button for two seconds, and then release the button and the red light starts flashing, machine and start shooting.

③ If you stop taking photos, short press release after operation key.

4) low

If the device is in a low power state is detected, the device will save the current file, the red light flashes five times before turning off shutdown.

5) charging

① off camera.

Through the USB cable to connect the camera and PC or other device.

③ during charging, the red light flashes; Filled, a long red light.

6) removable disk

① shutdown or standby mode connect the camera to the computer.

② ' my computer ' removable disk appears in identification.

7) reset

① equipment due to a mistake or other unknown reasons is not responding and needs to be reset.

Using a long, thin tool press the reset hole.

8) to change the time

① changes the system time of the computer you want to display on the camera time.

II turn off the camera.

③ take random CD into your computer's CD or DVD drive.

④ original data cable with the camera connected to the computer and camera

II run the CD change tools.

⑥ normal disconnects.

9) webcam

① install the camera driver.

Under the second, the camera is in a shutdown state.

③ connect the camera and computer.

About ' my computer ' jump out of the network cameras to identify automatically.

10) frequently asked questions

① issues: after the red light flashes five times, what is the reason for the shutdown of the camera?

Answer: check whether the memory is full or the battery is in a low power state.

If the memory is full, delete or backup files in the memory or insert another memory card.

If you are in a State of low, please charge.

Second question: no answer

Answer: due to mistake or of unknown origin, may cause the device to not work. Need to reset the device.

Press the reset hole with the slenderness of the tool.

Three: parameter

! !

Operation

1) on/off

① boot

Long press the operations button for two seconds to open the device, long red light, enters the standby state.

② shutdown

Long press the operation button for four seconds, the red light goes out shut.

2) photo

① standby mode (if it is not in standby mode, short boot or enter standby press the action key).

II camera need to shoot a goal.

③ Press operation button, red light flashes once, take a picture

3) video

① standby mode (if it is not in standby mode, short boot or enter standby press the action key).

II press and hold action button for two seconds, and then release the button and the red light starts flashing, machine and start shooting.

③ If you stop taking photos, short press release after operation key.

4) low

If the device is in a low power state is detected, the device will save the current file, the red light flashes five times before turning off shutdown.

5) charging

① off camera.

Through the USB cable to connect the camera and PC or other device.

③ during charging, the red light flashes; Filled, a long red light.

6) removable disk

① shutdown or standby mode connect the camera to the computer.

② ' my computer ' removable disk appears in identification.

7) reset

① equipment due to a mistake or other unknown reasons is not responding and needs to be reset.

Using a long, thin tool press the reset hole.

8) to change the time

① changes the system time of the computer you want to display on the camera time.

II turn off the camera.

③ take random CD into your computer's CD or DVD drive.

④ original data cable with the camera connected to the computer and camera

II run the CD change tools.

⑥ normal disconnects.

9) webcam

① install the camera driver.

Under the second, the camera is in a shutdown state.

③ connect the camera and computer.

About ' my computer ' jump out of the network cameras to identify automatically.

10) frequently asked questions

① issues: after the red light flashes five times, what is the reason for the shutdown of the camera?

Answer: check whether the memory is full or the battery is in a low power state