OEM optional brands: love Shuo, Guangzhou cherry, Guangdong Smith, etc., the specific consultation customer service

Hotel factory channel business agents a large number of large quantities of Congyou Oh

Tel: 18925965353,18938776186. WeChat 18925965353,

QQ: 1259169210

Welcome interested, to the factory site inspection logistics or delivery please contact us.

Courier logistics costs

Buyers can contact us to modify, we will be based on the courier company's offer

Sale and warranty: machine 3 years, liner 8 years, small problems made accessories, large problems directly for new machines, consulting online customers

Full set of advanced configuration:

Pressure relief valve + treatment shower, shower seat + stainless steel shower water hose +2 hook screw + leakage protection power cord + stainless steel inlet pipe +2 anti-electric wall + mixed valve.

Standard factory configuration:

Pressure relief valve + shower, shower seat + shower hose +
2 hook screws + leakage protection power cord + mixing valve.

Factory hotel channel business agents a large number of large quantities of Congyou Oh

Tel: 18925965353,18938776186 welcome interested, to the factory site visits logistics or express, please contact us.

Detailed description of technical parameters

Size specification

40 liters 620 * 340 * 340
50 liters 720 * 340 * 340
60 liters 820 * 340 * 340
80 liters 760 * 410 * 410
100 liters 920 * 410 * 410
120 liters 1060 * 410 * 410

Manual measurement, there are errors to prevail in kind.

Features:

1, the installation of the wall must be installed on the wall thickness of more than 10cm solid wall, the capacity of more than 80 liters when the installation is best to install a more solid bracket;

2, the installation environment should be relatively dry and ventilated, no other corrosive gases exist, and the water and the sun can not directly contact the place;

3, the room must have a reliable ground drain, easy drainage;

4, the power supply must have a reliable grounding or leakage protection device;

5, electric water heater normal water pressure, generally not more than 0.7mpa, if the water pressure is too high, then we must be installed in front of the valve.

Instructions

1, the water, first open the electric water heater at any of the water any of the water valve, mixing valve transferred to the high temperature water discharge position, and then open the inlet valve, this time the liner began to fill water until the water valve normal water, And then close the water valve, the water valve in the normal use of the open state

2, plug in the power plug, press the reset button on the leakage switch, the leakage switch indicator light, with a water temperature display electric water heater temperature display shows the water temperature inside the cylinder, press the control box on the rocker switch 'I ', At this time, the switch' I 'inside the light, indicating that a group of heating tube in the liner to work. If you press the rocker' II ', then switch' II 'within the light, indicating the liner Another group of heating tubes also work, and with this feature, it is possible to save all the two switches when they are small or in the summer when they can be heated alone with a heat pipe,

3, turn the thermostat knob, adjust to the temperature you need to set, clockwise rotation for the temperature rise, counterclockwise rotation for the temperature drop, generally can be placed in the highest temperature position, when the water temperature reaches the set temperature, the electric water heater Automatically stop working, this time rocker switch indicator light off, the display shows the water temperature, the water temperature dropped to a certain temperature, the electric water heater will automatically turn on the power to reheat

4, electric water heater in the heating, one-way safety valve will have water or a small amount of water outflow, this is a normal phenomenon, this time can be an ordinary plastic pipe to the water to the appropriate place

5, adjust the mixing valve can be suitable for your water temperature, the electric water heater in the adjustment of good mixing valve temperature, the hot water temperature is basically constant, do not often adjust the mixing valve, only in the liner hot water When you are about to run out, the water needs to adjust the angle of the mixing handle slightly

※ Do not shower the shower against the human body, so as not to burn the skin

Seven, special advice

● For the first time, the electric water heater must be filled with water before the power supply is allowed

● Do not use electric water heater when there is no water supply

● In the cold and easy icing area, when the water is not used for a long time, the water in the electric water heater should be drained and empty. When the empty mouth can be unscrewed, the mixing valve is placed in the open position

● The power cord is damaged and must be supplied with a dedicated power cord supplied by the manufacturer and replaced by a qualified service technician

● The grounding grid of the power outlet must be grounded reliably. Instead of grounding the ground, the fire wire, the position of the zero line in the socket (see the manual for details). Do not connect the zero line or ground wire in the socket. Together, the ground is strictly prohibited live, or it will happen electric shock accident

Eight, note

● The grounding grid of the power outlet must be grounded reliably

● You must use 220V ~ 50Hz power supply

● The rated current of the socket is not lower than the rated current of the electric water heater

● The socket and the power plug are kept dry to prevent leakage

● In the cold water inlet of this machine, you must install the original one-way safety valve

● For the first time, must be filled with water, before the power heating, water, the water heater outlet at least one valve to open the exhaust air, filled with water can close the valve

● If the user uses the tap water pressure> 0.75Mpa, that is, one-way safety valve often discharge pressure, the inlet pipe first need to install a pressure reducing valve, the pressure relief valve installed as far as possible away from the electric water heater place

● During the heating process, one-way safety valve may drop water droplets, this is a normal phenomenon, do not plug this port, so as to avoid accidents

● The drain pipe connected to the relief port should be tilted down

Maintenance methods and the use of Note:

Maintenance:

1, regular cleaning liner, long-term use, because the water contains trace impurities and minerals after long-term precipitation down, such as irregular

Cleaning, then, will affect the water quality and service life;

2, not less than once a year of regular checks on the safety performance and some other potential risks for careful detection and exclusion;

3, long-term do not use, to turn off the power, the tank of water storage emptying;

4, in order to ensure the normal use of water heaters, the monthly safety valve to be carried out not less than once the maintenance, to ensure the normal pressure relief valve.

Precautions for use:

1, the water must be open when the water outlet, and other empty air completely discharged before checking whether the water filled;

2, before the emptying must first cut off the power;

3, for closed installation, heating during the inlet valve must be open.

Multi-advantage function, filling the technology care

1, with digital temperature display, mechanical temperature control, easy to operate.

2, ultra-fine micro-foam technology, insulation layer thick, dense, good insulation effect.

3, anti-high temperature, anti-dry, anti-leakage and other eight safety protection, security more at ease.

4, and Haier, million and the United States and the same gold-enamel liner, metal drum series.

5, the scientific design of the independent sewage outfall, useful to extend the life of the liner.

6, anti-corrosion cleaning device, strong softening water quality beneficial to health.

7, the temperature shows the water temperature at a glance, Chinese and Western technology, more noble and elegant

8, anti-high temperature, high pressure, leakage, water and electricity completely separated, when the water leakage in the accident, in 0.1 seconds instantaneous power