Factory hotel school channel agents large quantities of large favorably

Tel: 18925965353,18938776186. WeChat 18925965353,

QQ: 1259169210

Welcome to those who visit the factory to send logistics or courier, please contact us.

1, hanging wall must be installed wall thickness greater than 10cm solid wall, the capacity of more than 80 liters of the installation of the best installation of a more solid bracket;

2, the installation environment should be more dry and ventilated, there is no other corrosive gases, and water and sunlight can not direct contact with the place;

3, indoor need to have a reliable floor drain, easy drainage;

4, the power must have a reliable grounding or leakage protection devices;

5, electric water heater normal water pressure, generally not more than 0.7mpa, if the water pressure is too high, then we must be installed in front of the valve.

Instructions

1, the water, first open the electric water heater at any of the water any of the water valve, mixing valve transferred to the high temperature water discharge position, and then open the inlet valve, this time the liner began to fill water until the water valve normal water, And then close the water valve, the water valve in the normal use of the open state

2, plug in the power plug, press the reset button on the leakage switch, the leakage switch indicator light, with a water temperature display electric water heater temperature display shows the water temperature in the liner, press the control box on the rocker switch 'I ', At this time, the switch' I 'inside the light, indicating that a group of heating tube in the liner to work. If you press the rocker' II ', then switch' II 'within the light, indicating the liner Another group of heating tubes also work, and with this feature, it is possible to save all the two switches when they are small or in the summer when they can be heated alone with a heat pipe,

3, turn the thermostat knob, adjust to your need to set the temperature, clockwise rotation for the temperature rise, counterclockwise rotation for temperature reduction, the general can be placed on the highest temperature position, when the water temperature reaches the set temperature, the electric water heater will Automatically stop working, then rocker switch inside the indicator light off, the display shows the water temperature value, the water temperature dropped to a certain temperature, the electric water heater will automatically turn on the power reheat

4, electric water heater in the heating, the one-way valve will be a small amount of water droplets or water out, this is a normal phenomenon, at this time can be an ordinary plastic pipe to the water lead to the appropriate place

5, adjust the mixing valve can be suitable for your water temperature, the water heater in the adjustment of the mixing valve temperature, the hot water temperature is basically constant, do not always adjust the mixing valve, only the hot water in the tank When you are almost finished, adjust the angle of the mixing handle slightly

※ Do not sprinkle on the body to test the water temperature, so as not to burn the skin

Special Advice

● For the first time, the electric water heater must be filled with water before the power supply is allowed

● Do not use electric water heaters when there is no running water supply

● In cold and iced areas, when the water is not used for a long time, the water in the electric water heater should be drained.

● If the power supply cord is damaged, use the special power cord provided by the manufacturer and replace it with a qualified service person.

● The ground of the power socket must be grounded reliably. Do not replace the grounding wire, fire wire and neutral wire in the socket with water pipe, etc. (Please refer to the instruction manual for details) Together, the ground is strictly prohibited live, otherwise it will happen electric shock accident

Eight, precautions

● The earthing pole of the power socket must be grounded reliably

● A 220V ~ 50Hz power supply must be used

● The rated current value of the outlet is not lower than the rated current value of the electric water heater

● Keep the socket and power plug dry to prevent leakage

● In the cold water inlet, the original one-way safety valve must be installed

● First use, you must first fill with water, only electricity heating, water injection, the water heater outlet at least one valve open to discharge the air tank, filled with water can be closed after the valve

● If the user uses the water pressure> 0.75Mpa, that is, one-way relief valve is often the pressure relief of water, the inlet pipe head also need to install a relief valve, the valve installed as far away from the electric water heater

● During heating, one-way safety valve may drop water, this is a normal phenomenon, do not block this port, so as to avoid accidents

• The drain connected to the relief port should be held down-tilted

Maintenance methods and the use of Note:

Maintenance:

1, regular cleaning liner, long-term use, because the water contains trace impurities and minerals after long-term precipitation down, such as irregular

Cleaning, then, will affect the water quality and service life;

2, not less than once a year of regular checks on the safety performance and some other potential risks for careful detection and exclusion;

3, long-term do not use, to turn off the power, the tank of water storage emptying;

4, in order to ensure the normal use of water heaters, the monthly safety valve to be carried out not less than once the maintenance, to ensure the normal pressure relief valve.

Precautions for use:

1, the water must be open when the water outlet, and other empty air completely discharged before checking whether the water filled;

2, before the emptying must first cut off the power;

3, for closed installation, the heating valve must be open during the inlet state.

Multiple advantages, filling technology care

1, with digital temperature display, mechanical thermostat, easy to operate.

2, ultra-fine porous foam technology, thick insulation layer, density, good insulation.

3, anti-high temperature, anti-dry, leakage protection, such as eight-fold security protection, security, more at ease.

4, and Haier, and million, and the United States the same Jinui enamel interior, metal drum series.

5, the scientific design of the independent sewage outfall, useful to extend the liner life.

6, anti-corrosion cleaning device, a strong softening water good for health.

7, the temperature display, water temperature at a glance, the combination of Chinese and Western technology, even more noble and elegant

8, anti-high temperature, anti-high pressure, leakage power, water and electricity completely separated, when the accidental leakage in the water, the instantaneous power in 0.1 seconds