Factory hotel school channel agents large quantities of large quantities of Congyou Oh

Tel: 18925965353,18938776186. WeChat 18925965353,

QQ: 1259169210

Welcome to those who visit the factory to send logistics or courier, please contact us.

On the Logistics Cost of Courier

Buyers must contact us to modify, we will quote the courier company's accounting

After-sales and warranty: machine 3 years, 5 years liner, small problems hair accessories, big problem directly for new machines, consulting online customers

1, the installation of the wall must be installed on the wall thickness of more than 10cm solid wall, the capacity of more than 80 liters when the installation is best to install a more solid bracket;

2, the installation environment should be relatively dry and ventilated, no other corrosive gases exist, and the water and the sun can not directly contact the place;

3, indoor need to have a reliable floor drain, easy drainage;

4, the power must have a reliable grounding or leakage protection devices;

5, electric water heater normal water pressure, generally not more than 0.7mpa, if the water pressure is too high, then we must be installed in front of the valve.

Instructions

1, the water, the first water heater to open any water at any water service valve, the mixing valve is adjusted to high temperature water position, and then open the inlet valve, then started filling the water tank, until the normal water valve outlet, And then close the outlet valve, inlet valve in normal use is open

2, plug in the power plug, press the reset button on the leakage switch, the leakage switch indicator light, with a water temperature display electric water heater temperature display shows the water temperature inside the cylinder, press the control box on the rocker switch 'I ', At this time, the switch' I 'inside the light, indicating that a group of heating tube in the liner to work. If you press the rocker' II ', then switch' II 'within the light, indicating the liner Another group of heating tubes also work, and with this feature, it is possible to save all the two switches when they are small or in the summer when they can be heated alone with a heat pipe,

3, turn the thermostat knob, adjust to the temperature you need to set, clockwise rotation for the temperature rise, counterclockwise rotation for the temperature drop, generally can be placed in the highest temperature position, when the water temperature reaches the set temperature, the electric water heater Automatically stop working, this time rocker switch indicator light off, the display shows the water temperature, the water temperature dropped to a certain temperature, the electric water heater will automatically turn on the power to reheat

4, electric water heater in the heating, one-way safety valve will have water or a small amount of water outflow, this is a normal phenomenon, this time can be an ordinary plastic pipe to the water to the appropriate place

5, adjust the mixing valve can be suitable for your water temperature, the electric water heater in the adjustment of good mixing valve temperature, the hot water temperature is basically constant, do not often adjust the mixing valve, only in the liner hot water When you are about to run out, the water needs to adjust the angle of the mixing handle slightly

※ Do not shower the shower against the human body, so as not to burn the skin

Seven, special advice

● For the first time, the electric water heater must be filled with water before the power supply is allowed

● Do not use electric water heater when there is no water supply

● In the cold and easy icing area, when the water is not used for a long time, the water in the electric water heater should be drained and empty. When the empty mouth can be unscrewed, the mixing valve is placed in the open position

● If the power supply cord is damaged, use the special power cord provided by the manufacturer and replace it with a qualified service person.

● The ground of the power socket must be grounded reliably. Do not replace the grounding wire, fire wire and neutral wire in the socket with water pipe, etc. (Please refer to the instruction manual for details) Together, the ground is strictly prohibited live, otherwise it will happen electric shock accident

Eight, precautions

● The earthing pole of the power socket must be grounded reliably

● A 220V ~ 50Hz power supply must be used

● The rated current value of the outlet is not lower than the rated current value of the electric water heater

● Keep the socket and power plug dry to prevent leakage

● In the cold water inlet, the original one-way safety valve must be installed

● For the first time, must be filled with water, before the power heating, water, the water heater outlet at least one valve to open the exhaust air, filled with water can close the valve

● If the user uses the tap water pressure> 0.75Mpa, that is, one-way safety valve often discharge pressure, the inlet pipe first need to install a pressure reducing valve, the pressure relief valve installed as far as possible away from the electric water heater place

● During the heating process, one-way safety valve may drop water droplets, this is a normal phenomenon, do not plug this port, so as to avoid accidents

● The drain pipe connected to the relief port should be tilted down

Maintenance methods and the use of Note:

Maintenance:

1, regular cleaning liner, long-term use, because the water contains trace impurities and minerals after long-term precipitation down, such as irregular

Cleaning, it will affect the water quality and service life;

2, the annual inspection of not less than once, the safety performance and other potential hidden dangers may be carefully detected and excluded;

3, long-term non-use, to turn off the power, the inner tank of water emptying;

4, in order to ensure the normal use of water heaters, the monthly safety valve on the need for not less than one maintenance, to ensure the normal pressure relief valve.

Caution:

1, Sheung Shui must be open to the outlet, such as the liner completely discharged after the air can check whether the water is full;

2, emptying the power must be cut off before;

3, for closed installation, the heating valve must be open during the inlet state.

Multiple advantages, filling technology care

1, with digital temperature display, mechanical thermostat, easy to operate.

2, ultra-fine porous foam technology, thick insulation layer, density, good insulation.

3, anti-high temperature, anti-dry, leakage protection, such as eight-fold security protection, security, more at ease.

4, and Haier, and million, and the United States the same Jinui enamel interior, metal drum series.

5, the scientific design of the independent sewage outfall, useful to extend the liner life.

6, anti-corrosion cleaning device, a strong softening water good for health.

7, temperature display, water temperature at a glance, the combination of Chinese and Western technology, even more elegant

8, anti-high temperature, high pressure, leakage, water and electricity completely separated, when the water leakage in the accident, in 0.1 seconds instantaneous power