*

Product Name: split hydraulic punching machine
Product Type: CH-60
Copper: 10mm
Tonnage: 31T
Throat depth: 95 mm
Weight: 17.6 kg
Mold configuration:
3/8 '(ф10.5mm2), 1/2' (ф13.8mm2), 5/8 '(ф17.5mm2), 3/4' (ф20.5mm2)
Function Description:
1. Separate hydraulic punching machine for L, H flat copper, copper row of aluminum punching.
2. At the end of the design of a flat seat, stable not fall down Akira.
3. Single-hole back to the oil, mold high-carbon tungsten alloy steel can not be damaged.
4. Specialized for angle iron, flat iron, copper and other metal sheet drilling, especially for power, construction and other industries in the field site operations.


Name: Copper cutting tools
Model CWC-150
Output: 20T
Width: 150 mm
Maximum thickness: 10mm
Weight: 30kg
● This machine is a special tool to cut off copper and aluminum busbar, need pump (hand pump, foot pump, electric pump).
● The cutter is made of alloy steel and heat-treated, the fracture is smooth and tidy, smooth and no distortion, no burr, accord with national standard, no
Dust, no noise, green.
● Unilateral cutting without waste.

Name: copper bending machine

Product Type: CB-150D
Technical Parameters:
◎ Applicable to switch box, switchboard automatic control panel wiring works, the use of separate portable;
◎ bent copper or aluminum row bending angle of 90 degrees is correct, does not damage the material from light to copper;
◎ Separate operation, with a variety of pump to operate;
◎ the bending of copper, aluminum row size of the largest 10mm × 150mm;
◎ The machine is equipped with adjustable balance bar to facilitate the use of small copper;
◎ marked on the base of the machine scale, bending angle to the operator to control;
◎ The machine has large tonnage, large bending curvature and good electrical conductivity. The minimum angle of bending is 90 °.
◎ Type Horizontal type latest output 20TON copper width 150mm maximum thickness of 10mm
◎ CB-150D is a portable, when bending a long copper bar, N-shaped or L-shaped card can be tied to remove the whole row can be unhindered
◎ design of the angle specified degree, 45 degrees instructions, to avoid excessive;