I. Overview

XYZ-2088 series pressure transmitter adopts high-precision pressure sensor, high-quality electronic components, the signal amplification, non-linear correction, temperature compensation, voltage and current conversion, reverse polarity protection signal processing, 10mA, 20mA ~ 4mA, 1 ~ 5V, 0 ~ 5V, 0 ~ 10V and other industrial standard signals, the use of different connectors can be strong corrosive media, high and low temperature media, viscous media accurate measurement can be widely used Petroleum, chemicals, electric power, light industry, hydraulic, pharmaceutical, metallurgy, textile and other industrial sites, is the ideal pressure measurement instrumentation in the industrial field.

Second, the main technical parameters

Measuring range: -100Kpa-0 ~ 6MPa 0-200pa ~ 250Mpa Interval selection.

Supply voltage: 12~30V, Recommended 24VDC (Non-switching power supply)

Output: 4 to 20 mA , 0 to 10 mA , 20mA to 4mA, 1~5V, 0~5V, 0~10V.

Accuracy: 0.25level, 0.5level, 1.0level

Ambient temperature: -20~+70℃ (medium temperature: -20~+80° C)

Temperature effects: ?0.02% Fs1Lt; 0 & gt; C

Explosion-proof: Explosion-proof dIIBT4

Shell protection: better than IP65

Wiring lead-out mode : Can be derived from any one of the export, it is recommended to use the smallest φ7.5 industrial cables as a lead in order to seal, lead-out connector for the general cable connector M12 × 1.5,

three , Features

Wide measuring range

Anti-overload and shock resistance

Rugged sealed aluminum alloy junction box, outdoor installation

Wide applicability: the product has a variety of models, a variety of process connection form, a variety of process connection materials, can be suitable for measuring the various occasions

Output signal in various forms, field adjustable, the scene can be displayed

Easy installation: product structure is reasonable, small size, light weight, can be installed directly at any location

Fourth, XYB series pressure transmitter selection table

2088 Universal aluminum case

2088Ex Explosion-proof aluminum shell

2088A delicate stainless steel series

2088B general aluminum shell liquid level series

2088C aluminum shell differential pressure series

No code or E1: 4-20mA ;Current transmission output, two-wire system

E2: 0-10mA current transmission output, three-wire system

V1: 0-5V; V2: 1-5V; V3: 0-10V; V4: 0.5-4.5V voltage transmission output, three-wire system

S: HART + 4-20mA HART communication protocol output

Y: User agreed signal output

No code: M20 * 1.5 threaded connection

ML: M20 * 1.5 Diaphragm thread connection

MF: DN25 diaphragm flange connection

MK: 1.5 inch hygienic clamp flange

Y: User agreed connection form

M1 0~100% Pointer table

M2 LCD liquid crystal display table

M3: LED digital display table

M4: intelligent display table

P1: 0.25; P2: 0.4; P3 or without code: 0.5; P4: 1.0 accuracy level

Pressure type: No code: gauge pressure A: absolute pressure

Measuring range: -100KPa-0 ~ 6MPa 0-200Pa ~ 250MPa interval selection

7, use and installation

1. Pressure transmitter should be installed in a small temperature fluctuations, while avoiding vibration and shock.

2. Process connection: M20 * 1.5 because of different working conditions, and NPT, ZG, R, G and other threaded interface and HG, ANSI and other specifications flange interface (before ordering the user to consult with our company).

3. Transmitter for a variety of mild corrosive liquid and gas pressure measurement. Produced by the explosion-proof requirements of the transmitter, according to the product explosion-proof grade for different explosive environments, and its associated equipment should have the explosion-proof function.

4. For strong corrosive media (such as acid, alkali) and other corrosive media, can choose diaphragm technology diaphragm pressure transmitter for the scene.

5. Signal terminals are OUT + and -. TEST + and - for the field signal test terminals, with a multimeter 20mA block positive and negative gauge pen measurement.For the anti-interference, the signal lines do not together with other power lines through the line pipe or trunking, High-power equipment through the vicinity,

6. It should be noted that strong corrosive or superheated media should not be in direct contact with the transmitter, such as the use of lead pressure pipe, should prevent the sediment in the pressure tube precipitation, and in the measurement of steam or other high-temperature medium, Transmitter operating temperature exceeds the limit for steam measurement, the pressure pipe to be filled with water, to prevent direct contact with the transmitter and steam.

8, pressure transmitter safety instructions

1. Non-explosion-proof power supply must pass through the safety barrier into the safe side of the transmitter maximum open-circuit voltage is less than 35V, the maximum short-circuit current should be less than 35mA.

2. Transmitter circuit composition, the total resistance should be specified in the operating instructions in the work area, used in an explosive environment, the total required distribution bus inductance is less than 1mH, the total distributed capacitance is less than O. 1uf.

3. After wiring, the cover must be tightened by hand.

URL: Www.wxsldyb.net

Www.wxsldyb.com

Tel: 0510-82328671 85886598

Wuxi 赛 Ledi Instrument Co., Ltd.