Product parameters:
















Battery maintenance far more than the vehicle factory → focus on electric tricycle pilot who!
Electric tricycle power comes from the battery, so the maintenance of the battery is essential, the battery is generally used in lead-acid batteries.
Battery maintenance can be carried out from the following six aspects:
1. Correctly grasp the charging time: the battery to discharge depth of 60% -70% when the charge is the best charge.
2. To avoid loss of power: long-term idle electric vehicles do not have time, should be charged once a month for the best.
3. Avoid high-current discharge: electric vehicles in the start, cargo, climbing, use the pedal power, to avoid the battery instantaneous discharge of large flow.
4. To avoid exposure: the temperature is too high will cause the battery from the drum, deformation. 5. To avoid overheating plug: Plug due to loose, oxidation and other reasons will lead to overheating short circuit to the battery causing fatal damage.
6. Periodic inspection: the use of electric vehicles in the process, if a significant reduction in mileage within a short time, most likely because one or a few of them appear cell break cell, plate softening, active material off plate, this time, Should be promptly to the battery maintenance organizations overhaul, so you can maximize the battery life, reduce unnecessary expenses.
| Maintenance and maintenance far more than the vehicle plant → focus on electric tricycles 13 years! |
(1) should be checked before riding the battery box is locked, the display panel lights are normal.
(2) Driving in the rain on the water when the pavement, the water depth does not exceed the center of the electric wheel under normal driving conditions, such as driving the road area of water depth over the center of the electric wheel, electric wheel will likely seepage caused by failure.
(3) the vehicle should avoid the humid air, the temperature is too high and corrosive gases in the place, so as to avoid the metal parts of the electroplating paint surface chemical corrosion.
(4) the vehicle should avoid prolonged sun exposure and rain, so as not to damage the components within the controller, resulting in operational failure, the occurrence of accidents.
(5) electrical control part of the complex structure, the user should not be unauthorized disassembly, repair, such as the local charge voltage instability, easy to fuse fuse fuse, the proposed use of AC voltage regulator.
(6) electric bicycles feel heavy in the back, as well as the implementation of the front wheel will be a slight friction sound is normal.
(7) riding should not be overloaded, should not be placed too heavy goods and people, so as not to damage the battery and motor.
(8) Bicycle lubrication is an important part of the maintenance of bicycles, according to the use of the front axle, rear axle, axle, flywheel, fork, fulcrum pivot points and other parts every six months to a year to scrub and lubrication Recommend the use of molybdenum disulfide grease) .Electric wheel hub transmission parts have been coated with special lubricants, users do not have to scrub and lubricate.If there are abnormal circumstances, can be to our special maintenance points for maintenance

