Winter selling

RMB 25.00

RMB 24.00

RMB 28.50

RMB 17.50

RMB 25.50

RMB 8.60

RMB 10.50

RMB 4.00

Note: less than meters, the actual 26-27 meters

Thickness: 8C

Packing: 40 pieces / piece

Weight: 800G

Introduction

Interior trim film, that is, in the color of the car interior surface to form a layer of long-lasting insulation film. High profile car interior decoration is generally light-colored, on and off the shoes and interior decoration friction, the shoe polish and colored dirt wipe It is difficult to clean in the door and the interior decoration, and the interior film can protect the interior decoration, but also increase the appearance, easy to clean.The interior film is made of macromolecule polymer, adding various characteristic additives, Anti-oxidation, anti-oxidation, etc. It can be widely used in door, door bowl, rear guard, back mirror, rear backrest and other places.
Interior film has the following specific roles:
1, fully isolated from the outside after the paste, with anti-dust, anti-shoe polish, to keep the car clean and other functions.
2, the protective film surface to prevent scratching the wear-resistant layer, can reduce the formation of scratches.Effective fight against all kinds of wear and scratches.
3, not due to high temperature and metamorphism, color, anti-UV, exposure, air erosion, slow down the aging interior.
4, at any time to expose, no gum residue, interior restoration of a new long-term protection of the surface of the object, to maintain time up to three years.
5, to reduce cleaning costs within the room, saving expenses.
To ensure that the paste position before cleaning, paste, please press again after a period of time to ensure a solid, 12 hours do not wash the car.In order to make the paste position more accurate, it is recommended in the sticky Paste the interior membrane before the bubble in the water to wipe the paste. Installation steps mainly in the following areas:
1, the first volume to be posted on the number of parts needed to protect the film.
2, the need to clean parts of the paste, to determine no dust, dirt or wax.
3, with alcohol or water to wet the surface.
4, tear the end of paper, the film paste.
5, with a scraper to scrape the scrape, you can use the bank card or no use of the membership card instead.
6, trim more than the part.
7, with a hot hair dryer to bake the corners, while scraped with a good scraper.