Customer Information:

1. First of all to its material is to distinguish between PE or PVC, because the PE material from the appearance of slightly less texture, no wood texture, feel more like a general plastic. PVC is the general sense of the ecological wood, its smooth appearance, with Good texture and feel of wood, which PE material of ecological wood is generally used for outdoor, the cost is lower

2. Second, to grasp the use of the environment, green Wo ecological wood with waterproof, soundproof, flame retardant and other advantages, but not to say in what circumstances are suitable.If used in the sun room to do the top of the insulation, or easy to fade And deformation, and the sauna does not recommend the use of ecological wood, although in the ecological temperature range of ecological wood, but because it contains PVC and other additives, long-term at 70 degrees and above the high temperature easy to aging and deformation.

3. Finally from the appearance of attention to the effect of wood, if there is no wood or wood grain snake skin is low-grade products; like color pure, crisp cross-section, clear and rich wood is a good product, in addition to the plate can not be too soft, This is the performance of calcium powder and talc over the standard, from the feel carefully try.

Ecological wood ceiling installation steps:

Installation of the ecological wood ceiling First of all, to determine the installation program, put the line drilling, install the whole wire hanging rod, placed keel, leveling keel, error ≤ 3mm, the installation of the base liner, liner can choose nine plywood or 5mm multilayer, Hanging wood can be installed 100 × 25 square wood can be, ecological wood ceiling products follow the traditional aluminum alloy, steel ceiling installation method and the same general keel, therefore, generally know how to install aluminum alloy ceiling workers can install ecological wood ceilings, In addition, ecological wood can be sturdy, so it is easier to install, cut and shape than aluminum and plastic ceilings.

1, carefully measured the length of the installation of ecological wood ceiling ceiling area, according to the design shape, detailed calculation of ecological wood dismantling size, and keel density size.

2, using the level instrument out of the horizontal line, repeated 2 check flatness, with ink line pop-up baseline.

3, the material size is correct, fine cut the required ecological wood and light steel keel.

4, the analysis of pre-design modeling core support points, and design hanging line location, so reasonable and even share the weight of ecological wood ceiling, increase the ceiling life. Ceiling main reinforcement not less than 30 × 50 wood keel or 6-10 wire.

5, according to projections, eye-catching line, install the whole wire boom.

6, place the keel, and pay attention to the ceiling design part of the ceiling, to avoid the trouble for the next link is generally used is light steel keel, to do anti-rust treatment.

7, to ensure that the keel installation density is reasonable, there is no tilt of the case, the installation of the base liner, the basic liner is generally recommended with 5mm multi-layer board or nine plywood, fixed firmly.

8, with the preparation of the hardware hanging parts you have prepared the ecological wood ceiling just fine.

Green state Xiaobian proposal: it is recommended to install the time or find 1 to 2 woodworkers because the decoration will inevitably use the measurement tools and interception tools such as woodworking master of these aspects of more professional, generally a successful perfect measurement And interception. If our own operation may be some errors lead to some of the material abandoned,