Underground metal detector MD-3010II

MD-3010II Liquid crystal display type underground metal detector 2000Years into foreign markets by foreign merchants, and quickly enter the European and American markets, which are exported to the United States, Canada, United Kingdom, Germany, France, Italy, Finland, Turkey, Korea, Russia and more than 10 other countries.

Features and application:

MD-3010II Metal detector is a digital intelligent detector adopts advanced Japan original Fuji 32CPU Core circuit to convert the digital signal to the CPU. It has a distinguishing power, correct high features of the intuition is stronger.

MD-3010II Metal detectors are used to detect the metallic objects, which in addition to military applications, but also Widely used in security checks, archaeology, prospecting, treasure, lawn searching for metallic foreign bodies , MD-3010II Also applies to the desert in search of metallic foreign bodies in particular, gold and silver jewelry and coins.

Trial

In order to be familiar with detector response of various metals, before using for the first time, you can be carried out indoor and outdoor experiment

Indoor use

*Open the detector, detector is in normal working state.

*Probe on the desktop, remove the body wearing metal items, such as: watches, rings, jewelry and so on.

*Adjust the detection, detect faces the ceiling.

*The probe in the detection plate 2-3 inch, slowly across the detection plate.

Outdoor trial

*Open the detector, detector is in normal working state.

*Find a no metal objects in the ground in the open air.

*Probe targets buried in the ground, target distance should be maintained between 1-2 feet.

*Keep probe and the ground at a distance of 1 to 2 inches between the moving slowly at the probe targets buried detectors.

*When a target is detected, the detector makes a sound images start flashing on the LCD screen.

*Slowly lift the detection, increased depth icon on the LCD screen.

*At the time of detection, if the aperture from a destination pattern to another, or vice versa, this target is detected may not be on the display or the detection area

High ore content areas, reduce the sensitivity and detection again to avoid the latter.

Error signal

The product has high sensitivity, can detect objects buried deep, so unwanted signals and other obstructions can cause signal confusion, solution: mining signal Flash targets, you can probe is positioned on the ground before and after the scan, please take care to distinguish between occasional flashes of the signal and the Flash signal.

In order to reduce the error signal can be slow in small area of overlapping scans over short distances.

Used to detect disc

*Motion detection at a suitable speed, walking too fast, overlap will not be able to scan, and missing parts. Meanwhile, sensitivity will be reduced, will be missed deeply buried metal object.

*Detecting disk close to the ground, parallel to the ground in order to expand the breadth and depth search. If operating the lawn, you can gently close to the lawn.

Product data sheet:

1. Electricity Pool : 6Section 5Battery

2. Electricity Flow :Minimum ~ 30mA The largest ~ 60mA

3. Working voltage: 7.1~ 9.6v

4. Signal frequency : 7.5KHz+/-1KHz

5. Work environment : -20℃~ 60℃

6. Overall dimensions : (mm)550(Long ) X355 (Wide ) X153 (High)

7. Mao Heavy : 3kg

8. NET Heavy : 1.37kg

9. Loading Box: Per box 4Support