Ireland altimeter 600E

Description:

Ireland SupaRule600E The altimeter Is implemented using the principle of ultrasonic measurement, measuring, instruments to measure wire is above 15 c-beam ultrasonic wave and reflection after the beam reaches the wire, the instrument after receiving a reflected wave, according to the speed of ultrasound in air, you can calculate beam travel distance.

This series from Ireland Su Paluo company specializes in design and manufacturing. Products are sold in 52 countries around the world, the company's shares are listed on the London Stock Exchange. Track maintenance when using the instrument does not need to reach power (communication) overhead lines, manual operation, instantaneous, large-screen LCD display lose minimum distribution lines and the ground (height) distance in order for six lines, suitable for all kinds of insulation is electrified and non-electrified overhead wire replaced with stick or old method for measuring insulating rope. Especially for new lines and power grids while the safe distance and line crossing between measurements, is the ideal instrument for track maintenance workers to improve efficiency and safety. Su Paluo currently have to various regions of the world, power systems, telecommunications systems and rail systems has provided more than 13,000 units altimeter according to the unique characteristics of China's power industry, exclusive OEM Su Paluo company in China authorized the sale of the new RIC-2000 series enhanced altimeter the altimeter of the series in the original 300E, 300D was added on the basis of the following features:

• Measuring six high off the ground (lower) wire on distance, automatic conversion between line (crossing) the vertical distance.
• Measuring indoor wall dimensions, Poles, transformers and other target distances of up to 18 meters.
• Two kinds of measuring methods: TOP; Measure the distance from the top six wires in turn. BTM; Measure the distance from the lowest of six wires in turn.
• Easy to select the upper or lower the wire with the Tower (for example to avoid erecting power lines on the same tower or communications lines, etc).
• Instruments with self-test function makes it easy for users to check the accuracy of the instrument, calibration instrument against the wall surface.
• Further improvement of the Suppression of spurious signals, make the performance more stable, more convenient measurement, press the key once to complete a full operation.

Technical specifications:

Ireland SupaRule 600E altimeter Technical parameters:

Ireland SupaRule 600E altimeter Other functions:

Measurement wire line between (cross across) distance Shi, requirements two root wire minimum clearance for 150 mm instrument not by wire whether charged of effect, also not by earthquake, elevation and fog days of effect, but cannot in rainy day using, instrument from 3 meters above began displayed, 3 meters following for blind, this instrument not displayed any value, this is intends to such design is to avoid operator, ground objects interference measured readings or produced errors readings. Temperature effect of ultrasonic velocity, approximately every 1 will cause 0.2% of the wave velocity, so the instrument range 1-35 ℃ automatic temperature compensation, guarantees the proper reading, lower than 0 ℃,-5 c, subtract 1% from the readings, the same above 35 degrees Celsius, + 5 c, to increase the reading 1% reading. Due to the quartz crystals are the timer, so once the instrument is from the factory without re calibration, instrument the working life of at least 10 years.