Menu function settings

Press the Menu key to enter the Setup screen On the turn /Down key to select the setting item, and press OK key Go to the lower-level menu and select the specific function item, and then press OK key Confirm and press Menu key to exit.

To enter the system menu settings interface, press the menu key twice.

Note: The last setting is retained when the DVR is turned off

Instructions

DVR With video, camera, preview, AV OUT , Infrared night vision, G-SENSOR, Screensavers, Network camera first function, when used according to the need to choose, use before you insert TF card.

''1'Video mode

Press the power switch key Or connect the charger, DVR When the recording mode is selected and the recording starts automatically, the blue indicator flashes OK key Stop recording, then the blue light is on.

When using the charger, when the charger power is off, DVR delay 5Seconds after the automatic shutdown.

''2'Camera mode

Press the mode after power on key Select to enter the camera mode and press OK key To take pictures.

''3'Preview mode

Press the mode after power on key Select to enter the preview mode, press up /Down key to select Video files or photo files, press OK key Play or pause , Press the mode key to exit Preview mode.

''4'' AV OUT Features

by AV Connect the cable to this device TV And other output terminals connected, audio and video signals can be TV And other output terminal display.

''5Motion detection function

Set the Shooting Mode menu <Motion Detection >Item, set to <Open >,Enable the motion detection function. If the device to capture the moving object, then automatically enter a 1 minute video recording and save 1 minute if the object is still moving, the system will automatically start the next 1 minute video recording and save until the object stops moving, The system will stop recording and continue to detect.

When motion detection is disabled, the motion detection function is disabled automatically.

'6' infrared night vision function

Power on, short press the power button, turn on or off the infrared light.

'7' G-SENSOR function

DVR In the process of recording, when the acceleration of gravity reaches 4g (1g = 9.80 m / s ^ 2), DVR will automatically lock the current file is saved, This file will not be overwritten and deleted during cyclic recording.

'8' screensaver function

In the System Settings menu <Screen saver settings >, Set the automatic screen saver time or turn off the screen saver.

'9' charge

DVR connected to the charger to charge, charging the red indicator light is lit, fully charged, the red light goes out.

'10' Connect the computer

1. UDisk function: Confirm the system menu Features >The entry is selected for the disk drive USB Data cable to connect the computer, then the computer will appear a removable disk, the device enters UDisc mode UDisk mode, you can copy the recorded file or cut to the computer to play, can also be TF The card is removed and the data in the card is read using a card reader.

2. PC camera Features: Confirm the system menu Features >Select as PC camera , With the USB cable to connect the computer, the computer will appear on a standard video equipment, this time when the PC camera can be used.

'11' The date and time settings

Select from the system menu screen <Time setting>item , press OK key Enter the date and time settings interface.

In the Date & Time Settings screen, press OK key Select Year, Month, Day, Hour, Minute, use On the turn /Down key The year, month, day, hour, minute adjustment, all set up, press OK key OK Exit.

'12' System reset

If the equipment in the course of the anomaly, please click with a diameter of 1mm stick Reset button , The system will automatically reset.

Technical Parameters

Accessories

Manual Car Charger USB cable AV cable support