GPS Locator TK103B car tracker vehicle anti-theft device Locator car GPS Tracker

Oil alarm function on/off off/arm/disarm

1. use profile
1.1 the product based on the GSM/GPRS network and GPS satellite positioning system, set alarm, positioning, monitoring, emergency and tracking function in the integration of new products, by text message or contact each other to locate the remote target or monitor ...
1.2 features
1.2.1 supports double GPS/GSM base station location
1.2.2 support SMS/GPRS/Internet network data transmission (GPRS/Internet configuration specification)
1.2.3 supported GSM/GPRS automatic line and break even
1.2.4 support SMS/GPRS dual switch from work mode
1.2.5 supports remote setting terminal parameters
1.2.6 supports point-to-point monitoring, point to the group monitored, group to group supervision.
1.2.7 set of anti-theft, positioning, monitoring monitoring, alarm emergency and tracking multiple features and integration
2. field of application
Mainly used in vehicles and other mobile objects positioning and tracking

/1800/1900MHZ) wireless networks and GPS satellite positioning system, track in several ways, free monitoring software, global maps, computer real-time tracking; Mobile query map; GOOGLE EARTH tracking.

①. GSM network antenna interface ⑥. vibration sensor Jack

II. the SIM card connector ⑦. external connector interface

③. SIM card hole cards ⑧./GSM/GPS power status led

II. monitor mic jack ⑨. built-in battery switch

⑤. GPS positioning antenna interface ⑩. remote control receiver (optional, applies to b-type machines)

Host parameters

Application directions
Fleet/logistics/taxi rental industry

Support-locate server under the conditions of location: you can check real-time longitude/time/speed, use of public maps software, can real-time position information manually enter latitude and longitude.
If you are targeted by the query into an underground parking lot or other GPS blind area, the Tracker will report to your target is the end position location information.
Text location information services.

Remote fuel cut off
Time tracking functionality.
SMS remote reboot, reset button Reset

Input power: 12V-24V DC
GSM/GPS signal light

Authorization number add/remove features.
Covert alarm function.
Electronic fence, can be set to a fixed area, beyond the fixed area that is alarming.

Door open alarm
Illegal fire alarm
Shift alarm: when the vehicle down to the fortification, once it has been shifted to alarm to the authorized number.
Overspeed alarm: monitor targets can be set according to a certain speed over the speed alarm.
Low battery alarm function.

Motion alarm, Horn (also can be connected with the original car horn)

Vehicle-specific (power 12V-24V)
Base station +GPS real-time dual-position monitoring,
Remote fuel cut off
SMS arm/disarm.
Remote arm/disarm.
GPS blind area alarm
SOS, electronic fences, displacement, speed, low power, power failure alarm
Door alarm, ACC alarm, vibration alarm
GPRS traffic patterns
SMS tracking with GOOGLE maps links
Text location query
Web tracking platform, free PC version-tracking software installation,

Mobile tracking


Product advantages
Web monitoring center, Center for mobile version of the Jian www.gpstrackerxy.com

Demo account: DEMO password: 8888
APP supports Android phones and the iPhone using SMS version query client
Online platform free for one year

Terminal LEDs:

Terminal with red and blue lights. After you power on to the device through device red led lights for more than 10 seconds, then Flash every two seconds, said equipment into working condition. Red LEDs fast Flash indicates that the terminal equipment is communication. Flash blue light for two seconds, said GPS module is in standby, the blue led is not lit, says GPS module working, but not navigate, blue light on, says GPS module working, and had to navigate.

Terminal functions:

A, location tracking: positioning at all times through the platforms or mobile terminals, equipment running. Positioning platforms according to customer requirements.

B emergency alarm is triggered: when you have devices installed in the vehicle in case of emergency, issued a report to police.

C remote control circuit and circuit: via SMS anytime, anywhere control circuit terminals are installed a car and circuit.

D, remote monitoring: Dial Terminal phone number, once connected you can listen anywhere, anytime within 5 meters of the terminal equipment voice.

E, the movement alarm: texting via mobile phone to the device, start the motion alarm feature. Installed device will send an SMS notification when vehicle motion.

F overspeed alarm: texting via mobile phone to the device, start the speed alarm function. Terminals are installed when the vehicle speed exceeds the set speed will send an SMS notification.

G, electronic fences: through the electronic fence of platform functionality. Of the terminal equipment is installed vehicle alarm when out-of-bounds to the platform.

H, cell phone Gets the dimensions: by phone you can get the installation location of the equipment of the vehicle dimensions.

I, phone gets location: by phone to send commands to the device, the device returns a device's location, this feature requires platform support.

J, remote reboot system: through mobile texting device restart.

K set the positioning interval: set the interval of the data delivery platform through the mobile phone. Can also be transmitted via platform settings interval, depending on whether the platform supports this feature.

L, mileage statistics, ACC detection, power failure alarm function.

M, compatible with the original car anti-theft device. Car alarm alarm alarm equipment, notify owner via SMS.

N, remotely modify the IP addresses and ports.

Terminal settings:

ASetting administrator

Device has two modes of operation, one administrator mode, the other is a non-administrator mode. In administrator mode, only the authorized number can operate on equipment. In non-admin mode, all the numbers are available to operate the equipment. Devices by default as ' administrator '.

Device settings for Administrator status method to send the following text message to your device:

Administrator123456

Texting number becomes the administrator number. ' Administrator ' for instructions, '123456 ' for the device password. Device status changes from administrator to administrator-free method to delete administrator using the Administrator's phone number.

BAdd number

In administrator mode, administrator numbers, send the following SMS to add other numbers.

Add number123456 13612345678

' Add number ' for instructions, '123456' password for the device, '13612345678' for the number you want to add. This instruction only administrators can then operation. The administrator is not set, this command is not valid.

CDelete number

In administrator mode, administrator sending the following message to the device delete number.

Delete number123456 13612345678

Delete number ' for instructions, '123456' password for the device, '13612345678' for the number you want to delete. This instruction only administrators can then operation. Administrator removed your own number, the device back without administrator status, and automatically remove additional numbers.

D, Modify password

Send the following text message to the device to change the password.

Modify password123456 168168

' Modify password ' command, '123456' old password for the device, '168168 ' the new password for the device. Passwords must be 6 digits. Equipment initial password is 123456. In administrator mode, this directive only the administrator can then action. In a State of non-administrators, all numbers can be manipulated.

E, Oil control

By SMS can install the control circuit of the equipment of the vehicle. To disconnect the vehicle line, send the following text message to the device.

Fuel cut123456

The ' fuel ' for instructions, ' 123456 ' as the password. To close the circuit, send the following text message to the device.

Oil supply123456

The ' fuel ' for instructions, ' 123456 ' as the password. In administrator mode, just set the number before they can operate, without administrator status, all numbers can be manipulated.

F, Circuit control

By SMS can install the control circuit of the equipment of the vehicle. To disconnect the circuit of vehicles, send the following text message to the device.

Power outage123456

' Petrol ' instructions ' 123456 ' as the password. Closed circuit, send the following text message to the device.

Power supply123456

The ' fuel ' for instructions, ' 123456 ' as the password. In administrator mode, only a set number to operate, in a State of non-administrators, all numbers can be manipulated.

G, Listening devices

Calling Terminal numbers can be monitored. Monitor has three modes: 1) arbitrary listening: ' any listening ' to the device, return

' Set arbitrary monitor success. ', All numbers can be monitored. Device defaults to this mode 2) limiting listening: ' limit listening ' to the device, return limit monitoring was set successfully. ', Authorization number to listen to, this feature requires a card number to open the caller ID function in the device. 3) close monitoring: the ' close monitoring ' to the device, the device returns ' close monitoring success. ' After all the numbers are not listening.

H, Motion alarm

By sending the following message to the device, the movement alarm will be activated.

Motion alarm

' Campaign warning ' for the directive, this directive does not require a password. Set after the success of the device returns a message reads: ' set sport alarm successfully. When you launch this feature, vehicle movement when they send a text message to set this function on the phone, tips has movement of vehicles. ' When the function must be in the GPS signal is available. Cancel the motion alarm feature to send the following text message to your device.

Cancel the motion alarm

' Cancel the motion alarm ' directives, this directive does not require a password. In administrator mode, only a set number to operate this feature. In a State of non-administrator, all the numbers you can operate this function.

I, Overspeed alarm

By sending the following message to the device, the overspeed alarm will be activated.

Overspeed alarm80

' Speed alarm ' instructions ' 80 ' for speed limits for 80km/h, this directive does not require a password. Set the device returns a text message after a successful, says: ' overspeed alarm was set successfully. When you launch this feature, when the vehicle speed exceeds the set speed, it sends a text message to set this function on the phone, prompting vehicle speedometer. ' When the function must be in the GPS signal is available. Cancel the speed alarm function to send the following text message to the device.

Cancel the speeding alarm

' Cancel the overspeed alarm ' directives, this directive does not require a password. In administrator mode, only a set number to operate this feature. In a State of non-administrator, all the numbers you can operate this function.

J, Mobile phone get the dimensions

Can phone for installation of equipment vehicles the current dimension. By sending the following message to the device.

Mobile phone positioning

' Phone ' for the directive, the directive does not require a password. Under the device without administrator status, any number can send this command. Equipment in administrator mode, only authorized number can get position.

K, Set the device number

Set the platform, platform with a binding, valid depending on the platform. Set the method to send the following content to the device.

Device number13612345678

' Number ' for instructions '13612345678' for 11-digit phone number, must be 11 digits. Is the card inside the device number.

L, Restart the system

By phone on the following contents to the number of terminals, Terminal will restart.

Restart the system123456

' Reboot ' command, and '123456' as the password. After you restart the system, the device will return to oil supply, power supply status.

M, Set the transmit interval

Set Terminal return interval of data to the platform through the mobile phone. Sending content to the terminals on the number below,

Positioning interval 30The number of0

' Positioning interval ' for instructions, '30' interval for data transfer to the platform, meaning 30 seconds to send data to the platform, must be greater than 10 seconds. ' Number ' for instructions for '0' transfer an unlimited number of visits. To cancel a transfer can be made on the content to the device number below,

Cancellation

Device stops transmitting data to the platform. This functionality can also be achieved through platform, depending on whether the platform supports this feature.

NRestore initial password

When when you forget your device password, you can send text messages the device back to the original password. Send following message to the device number,

Restore password

' Restore the original password ' for instructions. Without an administrator under all numbers function can be manipulated, in case an administrator, only the administrator can operate this function. Equipment initial password is '123456'.

OModified IP Address and port

Can modify the IP address and port of the terminal equipment, the equipment transmitted data to another platform. Send following message to the Terminal on the number,

Address 123.67.87.9Port344

The ' address ' for the command, '123.67.87.9' is the IP address, ' port ' for the command, '344' is the port number.

P, Set up ACC Open and close the transfer interval

ACC on and off can be set to transmit data interval. Bloom ACC transmitted data to set interval

ACC Development of sending interval30

ACC opening 30 seconds a data platform. ACC closed when transmitting data to set interval

ACC Turn off sending interval60

ACC turn off 60 seconds a data platform.

Q, Mobile access Terminal locations

By mobile phone text message to get the terminal location. To get a terminal location

Gets the location

Location of device returns a device.

Implementation requirements:

1, open GPRS enabled mobile phone card, is opened to CMNET.

Terminal connection diagram:

Terminal equipment installed:

General GPS138 the installation of on-board equipment needed by local car repair services of professional and technical personnel for installation. Without the company's permission, users are not free to disassemble or repair, or face the consequences. When installing GPS antenna location and cannot have a metal block, GSM antenna try not to get too close to the metal.

EAccelerator:

1, first connect the GPS and GSM antennas, note the two antennas cannot be wrong, or not working properly, square for GPS antennas, t-GSM antenna. Put the SIM card into the card slot, and a metallic facing outward, and then plug in the device, device has a backup battery, can work a few hours without external power supply. Device power on red light is flashing after equipment positioned to the rear of the blue lights are often on, red light and blue light in the same hole.

2, positioning devices such as power on and then connect the power cable, red battery positive pole, black anode, to take on the often was stopped after the equipment is to be provided.

3, emergency alarm buttons, blue line alarm red, black black line to alarm line. Alarm button is not required to install, the user can according to their own needs to decide whether to install.

4, install a fuel cut off, the device supports both oil and electricity, fuel or power one can. Oil or electricity needed to relay, relay, there are 4 or 5 wires, 5 wires have a no answer, specific connections refer to the wiring diagram. Oil or power is not required, the user can according to their own needs to decide whether to install.

5, if installed on the car alarm, detection of the pink line received the positive electrode of the alarm Horn, horn alarm when equipment is also alert to inform the user.

6, can test high and low level custom line and sent to the State on the server, users may need to define the meaning of this line represents.

Scope of application:

A, car rental companies, outdoor machinery and equipment special anti-theft system

B, financial and insurance industry positioning and tracking system

C, various industries of command and dispatch system

D, used in large and medium construction vehicles equipment

E, logistics and cargo tracking

GPS Tracker, accurately, sets security, positioning, monitoring, alerting emergency and tracking capabilities and integration products, for car theft.
Meanwhile, the Terminal fully supported SMS/GPRS/Internet data transmission, making it more widely used in the fleet of cluster monitor, emergency dispatching, location services, traffic safety management and many other areas.

Details:
Based on GSM/GPRS (850/900/1800/1900MHZ) wireless networks and GPS satellite positioning system, track in several ways, free monitoring software, global maps, computer real-time tracking; Mobile query map; GOOGLE EARTH tracking.
Product advantages
Tiny in size, dimensions: 54mm*62mm*26mm, weighs 120 grams, easy to hide.
Support-locate server under the conditions of location: you can check real-time longitude/time/speed, use of public maps software, manually enter the latitude and longitude can be real-time location information
If you are targeted by the query into an underground parking lot or other GPS blind area, the Tracker will report to your target is the end position location information.
Remote fuel cut off
Time tracking functionality.
Authorization number add/remove features.
Covert alarm function.
Electronic fence, can be set to a fixed area, beyond the fixed area that is alarming.
Electric power failure alarm.
Door open alarm
Illegal fire alarm
Shift alarm: when the vehicle down to the fortification, once it has been shifted to alarm to the authorized number.
Overspeed alarm: monitor targets can be set according to a certain speed over the speed alarm.
Low battery alarm function.
Vehicle status enquiry
Optional features:
Vibration alarm
Application directions
Fleet/logistics/taxi rental industry

Technical parameters
GPS chip: SIRF3 chip
Number of channels: 20 parallel channels
Sensitivity: -159dBm
Accuracy: 5 m
Positioning time: cold start/warm start time 35/1 seconds