This user manual will detail the use and installation of this product, and provides you with detailed information, including the use, installation, notes and technical specifications, and so on. Please read this manual carefully before use and fully understand, please save this manual, we hope that this product will meet your needs and long-term service with you.

1 power switch 2, switch 3, confirms the key 4, camera 5, night light 6, TF card 7, led 8, USB

Charging:

The built-in rechargeable lithium-ion battery, using the machine for the first time, please charge. Toggle the power switch OFF when charging position and then connect the charger, machine is in shutdown state can be the fastest time for the machine is fully charged. When charging, red light flashing charging machine with long red when lit. Machines can be charged in the following ways:

1), connecting computer charge using USB data cable connected to the computer, you can charge.

2) using charger: USB data cable connected to the charger, then plug charger power socket, you can charge.

LEDs indicate the status of the machine:

1, battery low: red light flashing fast and the shutdown of the machine. The current recorded file will be saved automatically.

2, memory card: blue lights flashing fast and shut of the machine, the current recorded file will be automatically saved.

3, the machine did not fit into the memory card: machine fast flashing red and blue light at the same time, 10 seconds then automatically shut down.

4, machine outside of the voice-activated recording, any mode standby, if the machine has been idle, no nothing. Machine will shut down automatically after 1 minute.

5, recording standby mode blue light goes out long red light. Video work, blue lights red light flashing regularly.

6, camera standby mode, red light is off the blue lights light up. Pictures working, red light is off, take a picture of the blue light flashes once.

7, voice-activated recording standby mode, red light blinking blue light long regular, voice-activated recording work, flashing red and blue lights.

8, night vision function is on, the yellow light. Night vision function off, yellow lights.

Switch function:

1, the power dial to the OFF position power off the machine. NO power on the machine. When the machine in all operating conditions, such as working files are not saved directly into the power dial to the OFF position. Machines currently recorded file will not be saved.

2, and mode keys: video, photo, voice-activated video position, the machine enters the corresponding State. When the machine in the current mode status, such as toggle mode keys to work in other locations. Machine will stop and save the current recorded file, switch to the selected working mode.

3, make sure keys: control the machine videos, take pictures, saving, opening and closing night light functions. When the machine is in the appropriate mode and press the confirm key, the machine will start working. Press the confirmation key work, machine store working files. Standby or any mode, long press the Confirm button for 3 seconds, you can turn on infrared night vision light. Infrared night vision light long press the Confirm button for 3 seconds after the opening, you can turn off infrared night vision lights.

Video:

Power key in the OFF position the machine in a shutdown state. Confirm the mode key in the video position. The power key to the ON position, the machine power on the red and blue lights at the same time, then the blue light goes out, long red light. When the machine enters recording standby mode. Click the Confirm button 1. Red light blinking regularly, the machine to start recording. Machine video work, click the Confirm button 1, video files are saved automatically. Return to the standby state of the machine. After the machine starts the video recording, if not manually stop recording. Machines will be video, and save an AVI file automatically every 5 minutes. Until the memory card is full or machine will automatically save the recorded files run out of power and shut down.

Photo:

Boot into standby, the mode key in the Terminal to a photo location. When the red light is off, blue lights on, machines into camera standby mode requiring you to take pictures as long as clicking the Confirm button, blue light Flash Once taking pictures 1. Photo end returned to take pictures of the machine on standby.

Voice-activated recording:

When you boot the machine into standby, mode-dial to voice-activated video location, blue light red light long flashing regularly. Machines into a voice-activated recording standby, then as long as the environmental voice to reach 60 points, flashing red and blue lights of the machine, the machine will automatically start recording work. Every 3 minutes to save a video file, if machines did not detect ambient noise, after 3 minutes, the machine stops recording back to voice-activated recording standby. Voice-activated recording work needs to stop voice recording, you can press the confirm key. Recording file is saved the machine back to the voice-activated recording standby.

Charge:

Chargers plugged in and the machine through data cable charger. When the machine is powered on, flashing red light indicates the charging state of the machine. Charging machine power dial to NO location, press the Confirm button at the top of the machine, and according to the current position of the mode switch and machines into the appropriate mode standby indicator gives an indication. Now and the normal operation of the machine. Machines can achieve video, photo, voice-activated features such as video.

Opening and closing night vision:

Machine reboot, enter any mode the standby state of the machine, or working conditions. Need to turn on the night vision function, just long press the Confirm button for 3 seconds. Visual function indicator yellow light lit on the night, night vision is already turned on. Off the night vision feature and press confirm button for 3 seconds. Night vision LEDs the yellow lights, night vision has been closed.

Connected to a computer to read the data:

Machine switches in the OFF position when connecting computers, can be successfully connected to the computer. When the switch is in NO position, but led is off. In this case the machine will not function properly connected to the computer. Switch in NO position, the led must be off of the machine, the machine can be successfully connected to the computer. Or use the USB cable to the machine connected to the computer, you can edit the files inside of the machine.

PC camera function

After you install the DRIVER files in the CD, but when the PC camera to use. Machines not equipped with a memory card connected to the computer is a PC camera mode. When in ' my computer ' in webcam icon will appear, click on the camera icon in the computer can be used normally.

Reset:

When the machine when an illegal operation or other unknown reasons, caused when the machine is not working properly. You can reset the machine, as long as the power button to the OFF position to turn off the machine. Can be used to boot correctly after the reset.

Modify the and settings

Specific usage is as follows:

Create a text file named time.txt file formats requirements modify time, copy the txt file to the root directory of the USB flash drive mode. And then unplug the USB cable, open new machines once again. RTC time watermark write inside the machine, takes no time to watermark is the same way.

1:20110908142432 y (watermark)

2:20110908142432 n (No watermark shown)

Disposal: Please pay attention to environmental protection, do not discard the product. Ban the product thrown in the fire to avoid explosion.

Shenzhen Heng Xin Mao electronics technology limited is a driving recorder, DVR card, WIFI camera, surveillance cameras, industrial endoscopes, specializing in the production and processing company, offering a complete and scientific quality control system. Futian look firm in the faith, strength and quality of products recognized by the industry. Welcome all friends to visit and guide and negotiate business.