Product code: AB70

Flow range: 29ml/min~~1600ml/min (each flow: maximum flow is 9ml)

Optional voltage: 6 v DC geared motor, 12V, 24V, 6-24V stepper motor, synchronous motor 110V, 220V (Special voltages can be customized)

Motor power: DC geared motor about 10W, 30W 42 stepper motor, 50 motor 10W

Product weight: 376g (50 synchronous motor)

Shell material: flame retardant PP (with drill), PP (polypropylene)

Cam material: stainless steel 304#

Motor selection: DC 60 geared motor 50 57 stepper motor synchronous motor synchronous motor

Notes on the motor:

DC gear motor: low cost, easy to use, does not require driving circuitry, then turn

Stepper motors: the high cost of motor requires a specific drive and control circuit of circuit, long service life and high precision

Synchronous electric motors: low cost, can directly use the 220V domestic supply.

Biggest circle flow 8ml

This product is widely used for transportation of weak acids, alkali, salt and other corrosive liquid, chemicals, light industry, waste management ideal. In the long-term use, in practice, by the textile, chemical, printing and dyeing, mechanical, metal, metal industry, pipeline operations and other users.

Product use:

▲ Photo, extended, and colour film; X-ray film, microfilm, motion-picture film automatic washing;

• Beverage vending machines;

▲ Mucus reconcile, adding food additives;

• Electronic substrate printed circuit etching, cleaning, printing plate;

• For treatment of acid-base neutralization, condensate agent inputs;

• Quantitative supply of plating;

▲ Apply additive, quantitative injection of bleach and other chemicals.

Product features:

▲ Without leakage. Department of mechanical shaft seals, so there is no leakage;

• High output accuracy. Water at room temperature condition test cases, +1.5% of the high accuracy can be obtained;

• Self-priming. suction lift of 1 m

▲ Allow no-load. working chamber for the bellows, which can dry running;

• Long life. the series the pump Chamber using twists recipe-resistant materials made of polypropylene can withstand millions of reciprocating motion;

• Good resistance to rot. The pump body is made of polypropylene, valves use a special blend of FPM, EPDM, resistant to weak acids and alkaline corrosive liquids;

• Product specifications: AB70

▲ Flux Q=29ml/min~~1600ml/min

• Liquid temperature adapted to strong; Maximum liquid temperature 60 ° c, more than 50 ℃, the maximum pressure of 20 ℃, 1/2, corrosive liquid will increase when more than 40 ℃, it should be noted that.

Product description:

Temperature is below 55 degrees, sulfuric acid in 40%, nitric acid 40%, sodium hydroxide liquid in less than 40% 40%, ammonia under 25%, below 80% acetate, phosphoric acid in 30%, the liquid acid in 40%, hydrofluoric acid in 40%, acid 100%, and dilute the salt.